svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
csh(1)
csh(1) User Commands csh(1)
NAME
csh - shell command interpreter with a C-like syntax
SYNOPSIS
/usr/sunos/bin/csh [-bcefinstvVxX] [argument]...
DESCRIPTION
csh, the C shell, is a command interpreter with a syntax reminiscent of
the C language. It provides a number of convenient features for inter‐
active use that are not available with the Bourne shell, including
filename completion, command aliasing, history substitution, job con‐
trol, and a number of built-in commands. As with the Bourne shell, the
C shell provides variable, command and filename substitution.
Initialization and Termination
When first started, the C shell normally performs commands from the
.cshrc file in your home directory, provided that it is readable and
you either own it or your real group ID matches its group ID. If the
shell is invoked with a name that starts with '−', as when started by
login(1), the shell runs as a login shell.
If the shell is a login shell, this is the sequence of invocations:
First, commands in /etc/.login are executed. Next, commands from the
.cshrc file your home directory are executed. Then the shell executes
commands from the .login file in your home directory; the same permis‐
sion checks as those for .cshrc are applied to this file. Typically,
the .login file contains commands to specify the terminal type and en‐
vironment. (For an explanation of file interpreters, see Command Execu‐
tion and exec(2).)
As a login shell terminates, it performs commands from the .logout file
in your home directory; the same permission checks as those for .cshrc
are applied to this file.
Interactive Operation
After startup processing is complete, an interactive C shell begins
reading commands from the terminal, prompting with hostname% (or host‐
name# for the privileged user). The shell then repeatedly performs the
following actions: a line of command input is read and broken into
words. This sequence of words is placed on the history list and then
parsed, as described under USAGE. Finally, the shell executes each com‐
mand in the current line.
Noninteractive Operation
When running noninteractively, the shell does not prompt for input from
the terminal. A noninteractive C shell can execute a command supplied
as an argument on its command line, or interpret commands from a file,
also known as a script.
OPTIONS
The following options are supported:
-b Forces a "break" from option processing. Subsequent command line
arguments are not interpreted as C shell options. This allows the
passing of options to a script without confusion. The shell does
not run set-user-ID or set-group-ID scripts unless this option is
present.
-c Executes the first argument, which must be present. Remaining ar‐
guments are placed in argv, the argument-list variable, and
passed directly to csh.
-e Exits if a command terminates abnormally or yields a nonzero exit
status.
-f Fast start. Reads neither the .cshrc file, nor the .login file
(if a login shell) upon startup.
-i Forces interactive operation. Prompts for command line input,
even if the standard input does not appear to be a terminal
(character-special device).
-n Parses (interprets), but does not execute commands. This option
can be used to check C shell scripts for syntax errors.
-s Takes commands from the standard input.
-t Reads and executes a single command line. A '\' (backslash) can
be used to escape each newline for continuation of the command
line onto subsequent input lines.
-v Verbose. Sets the verbose predefined variable. Command input is
echoed after history substitution, but before other substitutions
and before execution.
-V Sets verbose before reading .cshrc.
-x Echo. Sets the echo variable. Echoes commands after all substitu‐
tions and just before execution.
-X Sets echo before reading .cshrc.
Except with the options -c, -i, -s, or -t, the first nonoption argument
is taken to be the name of a command or script. It is passed as argu‐
ment zero, and subsequent arguments are added to the argument list for
that command or script.
USAGE
Filename Completion
When enabled by setting the variable filec, an interactive C shell can
complete a partially typed filename or user name. When an unambiguous
partial filename is followed by an ESC character on the terminal input
line, the shell fills in the remaining characters of a matching file‐
name from the working directory.
If a partial filename is followed by the EOF character (usually typed
as Control-d), the shell lists all filenames that match. It then
prompts once again, supplying the incomplete command line typed in so
far.
When the last (partial) word begins with a tilde (~), the shell at‐
tempts completion with a user name, rather than a file in the working
directory.
The terminal bell signals errors or multiple matches. This bell signal
can be inhibited by setting the variable nobeep. You can exclude files
with certain suffixes by listing those suffixes in the variable fig‐
nore. If, however, the only possible completion includes a suffix in
the list, it is not ignored. fignore does not affect the listing of
filenames by the EOF character.
Lexical Structure
The shell splits input lines into words at space and tab characters,
except as noted below. The characters &, |, ;, <, >, (, and ) form sep‐
arate words; if paired, the pairs form single words. These shell
metacharacters can be made part of other words, and their special mean‐
ing can be suppressed by preceding them with a '\' (backslash). A new‐
line preceded by a \ is equivalent to a space character.
In addition, a string enclosed in matched pairs of single-quotes ('),
double-quotes ("), or backquotes (`), forms a partial word. Metacharac‐
ters in such a string, including any space or tab characters, do not
form separate words. Within pairs of backquote (`) or double-quote (")
characters, a newline preceded by a '\' (backslash) gives a true new‐
line character. Additional functions of each type of quote are de‐
scribed, below, under Variable Substitution, Command Substitution, and
Filename Substitution.
When the shell's input is not a terminal, the character # introduces a
comment that continues to the end of the input line. Its special mean‐
ing is suppressed when preceded by a \ or enclosed in matching quotes.
Command Line Parsing
A simple command is composed of a sequence of words. The first word
(that is not part of an I/O redirection) specifies the command to be
executed. A simple command, or a set of simple commands separated by |
or |& characters, forms a pipeline. With |, the standard output of the
preceding command is redirected to the standard input of the command
that follows. With |&, both the standard error and the standard output
are redirected through the pipeline.
Pipelines can be separated by semicolons (;), in which case they are
executed sequentially. Pipelines that are separated by && or || form
conditional sequences in which the execution of pipelines on the right
depends upon the success or failure, respectively, of the pipeline on
the left.
A pipeline or sequence can be enclosed within parentheses '()' to form
a simple command that can be a component in a pipeline or sequence.
A sequence of pipelines can be executed asynchronously or "in the back‐
ground" by appending an '&'; rather than waiting for the sequence to
finish before issuing a prompt, the shell displays the job number (see
Job Control, below) and associated process IDs and prompts immediately.
History Substitution
History substitution allows you to use words from previous command
lines in the command line you are typing. This simplifies spelling cor‐
rections and the repetition of complicated commands or arguments. Com‐
mand lines are saved in the history list, the size of which is con‐
trolled by the history variable. Regardless of that size, the most re‐
cent command is always retained. A history substitution begins with a !
(although you can change this with the histchars variable) and occurs
anywhere on the command line; history substitutions do not nest. The !
can be escaped with \ to suppress its special meaning.
Input lines containing history substitutions are echoed on the terminal
after being expanded, but before any other substitutions take place or
the command gets executed.
Event Designators
An event designator is a reference to a command line entry in the his‐
tory list.
!
Start a history substitution, except when followed by a space char‐
acter, tab, newline, = or (.
!!
Refer to the previous command. By itself, this substitution repeats
the previous command.
!n
Refer to command line n.
!-n
Refer to the current command line minus n.
!str
Refer to the most recent command starting with str.
!?str?
Refer to the most recent command containing str.
!?str? additional
Refer to the most recent command containing str and append addi‐
tional to that referenced command.
!{command} additional
Refer to the most recent command beginning with command and append
additional to that referenced command.
^previous_word^replacement^
Repeat the previous command line replacing the string previous_word
with the string replacement. This is equivalent to the history sub‐
stitution:
!:s/previous_word/replacement/.
To re-execute a specific previous command AND make such a substitu‐
tion, say, re-executing command #6,
!:6s/previous_word/replacement/.
Word Designators
A ':' (colon) separates the event specification from the word designa‐
tor. It can be omitted if the word designator begins with a ^, $, *, −
or %. If the word is to be selected from the previous command, the sec‐
ond ! character can be omitted from the event specification. For in‐
stance, !!:1 and !:1 both refer to the first word of the previous com‐
mand, while !!$ and !$ both refer to the last word in the previous com‐
mand. Word designators include:
# The entire command line typed so far.
0 The first input word (command).
n The n'th argument.
^ The first argument, that is, 1.
$ The last argument.
% The word matched by the ?s search.
x−y A range of words; −y abbreviates 0−y.
* All the arguments, or a null value if there is just one word
in the event.
x* Abbreviates x−$.
x− Like x* but omitting word $.
Modifiers
After the optional word designator, you can add one of the following
modifiers, preceded by a :.
h Remove a trailing pathname component, leaving the head.
r Remove a trailing suffix of the form '.xxx', leaving the
basename.
e Remove all but the suffix, leaving the Extension.
s/l/r/ Substitute r for l.
t Remove all leading pathname components, leaving the tail.
& Repeat the previous substitution.
g Apply the change to the first occurrence of a match in each
word, by prefixing the above (for example, g&).
p Print the new command but do not execute it.
q Quote the substituted words, escaping further substitutions.
x Like q, but break into words at each space character, tab or
newline.
Unless preceded by a g, the modification is applied only to the first
string that matches l; an error results if no string matches.
The left-hand side of substitutions are not regular expressions, but
character strings. Any character can be used as the delimiter in place
of /. A backslash quotes the delimiter character. The character &, in
the right hand side, is replaced by the text from the left-hand-side.
The & can be quoted with a backslash. A null l uses the previous string
either from a l or from a contextual scan string s from !?s. You can
omit the rightmost delimiter if a newline immediately follows r; the
rightmost ? in a context scan can similarly be omitted.
Without an event specification, a history reference refers either to
the previous command, or to a previous history reference on the command
line (if any).
Quick Substitution
^l^r^ This is equivalent to the history substitution:
!:s/l/r/.
Aliases
The C shell maintains a list of aliases that you can create, display,
and modify using the alias and unalias commands. The shell checks the
first word in each command to see if it matches the name of an existing
alias. If it does, the command is reprocessed with the alias definition
replacing its name; the history substitution mechanism is made avail‐
able as though that command were the previous input line. This allows
history substitutions, escaped with a backslash in the definition, to
be replaced with actual command line arguments when the alias is used.
If no history substitution is called for, the arguments remain un‐
changed.
Aliases can be nested. That is, an alias definition can contain the
name of another alias. Nested aliases are expanded before any history
substitutions is applied. This is useful in pipelines such as
alias lm 'ls -l \!* | more'
which when called, pipes the output of ls(1) through more(1).
Except for the first word, the name of the alias can not appear in its
definition, nor in any alias referred to by its definition. Such loops
are detected, and cause an error message.
I/O Redirection
The following metacharacters indicate that the subsequent word is the
name of a file to which the command's standard input, standard output,
or standard error is redirected; this word is variable, command, and
filename expanded separately from the rest of the command.
<
Redirect the standard input.
<<word
Read the standard input, up to a line that is identical with word,
and place the resulting lines in a temporary file. Unless word is
escaped or quoted, variable and command substitutions are performed
on these lines. Then, the pipeline is invoked with the temporary
file as its standard input. word is not subjected to variable,
filename, or command substitution, and each line is compared to it
before any substitutions are performed by the shell.
> >! >& >&!
Redirect the standard output to a file. If the file does not exist,
it is created. If it does exist, it is overwritten; its previous
contents are lost.
When set, the variable noclobber prevents destruction of existing
files. It also prevents redirection to terminals and /dev/null, un‐
less one of the ! forms is used. The & forms redirect both standard
output and the standard error (diagnostic output) to the file.
>> >>& >>! >>&!
Append the standard output. Like >, but places output at the end of
the file rather than overwriting it. If noclobber is set, it is an
error for the file not to exist, unless one of the ! forms is used.
The & forms append both the standard error and standard output to
the file.
Variable Substitution
The C shell maintains a set of variables, each of which is composed of
a name and a value. A variable name consists of up to 128 letters and
digits, and starts with a letter. An underscore (_) is considered a
letter). A variable's value is a space-separated list of zero or more
words. If the shell supports a variable name up to 128 characters the
variable SUNW_VARLEN is defined. If a variable name of up to 128 char‐
acters is not supported, then an older version of the shell is being
used, and the shell variable name length has a maximum length of 20.
To refer to a variable's value, precede its name with a '$'. Certain
references (described below) can be used to select specific words from
the value, or to display other information about the variable. Braces
can be used to insulate the reference from other characters in an in‐
put-line word.
Variable substitution takes place after the input line is analyzed,
aliases are resolved, and I/O redirections are applied. Exceptions to
this are variable references in I/O redirections (substituted at the
time the redirection is made), and backquoted strings (see Command Sub‐
stitution).
Variable substitution can be suppressed by preceding the $ with a \,
except within double-quotes where it always occurs. Variable substitu‐
tion is suppressed inside of single-quotes. A $ is escaped if followed
by a space character, tab, or newline.
Variables can be created, displayed, or destroyed using the set and un‐
set commands. Some variables are maintained or used by the shell. For
instance, the argv variable contains an image of the shell's argument
list. Of the variables used by the shell, a number are toggles; the
shell does not care what their value is, only whether they are set or
not.
Numerical values can be operated on as numbers (as with the @ built-in
command). With numeric operations, an empty value is considered to be
zero. The second and subsequent words of multiword values are ignored.
For instance, when the verbose variable is set to any value (including
an empty value), command input is echoed on the terminal.
Command and filename substitution is subsequently applied to the words
that result from the variable substitution, except when suppressed by
double-quotes, when noglob is set (suppressing filename substitution),
or when the reference is quoted with the :q modifier. Within double-
quotes, a reference is expanded to form (a portion of) a quoted string;
multiword values are expanded to a string with embedded space charac‐
ters. When the :q modifier is applied to the reference, it is expanded
to a list of space-separated words, each of which is quoted to prevent
subsequent command or filename substitutions.
Except as noted below, it is an error to refer to a variable that is
not set.
$var These are replaced by words from the value of var,
${var} each separated by a space character. If var is an en‐
vironment variable, its value is returned (but ':'
modifiers and the other forms given below are not
available).
$var[index] These select only the indicated words from the value
${var[index]} of var. Variable substitution is applied to index,
which can consist of (or result in) either a single
number, two numbers separated by a '−', or an aster‐
isk. Words are indexed starting from 1; a '*' selects
all words. If the first number of a range is omitted
(as with $argv[−2]), it defaults to 1. If the last
number of a range is omitted (as with $argv[1−]), it
defaults to $#var (the word count). It is not an error
for a range to be empty if the second argument is
omitted (or within range).
$#name These give the number of words in the variable.
${#name}
$0 This substitutes the name of the file from which com‐
mand input is being read except for setuid shell
scripts. An error occurs if the name is not known.
$n Equivalent to $argv[n].
${n}
$* Equivalent to $argv[*].
The modifiers :e, :h, :q, :r, :t, and :x can be applied (see History
Substitution), as can :gh, :gt, and :gr. If {} (braces) are used, then
the modifiers must appear within the braces. The current implementation
allows only one such modifier per expansion.
The following references can not be modified with : modifiers.
$?var Substitutes the string 1 if var is set or 0 if it is not
${?var} set.
$?0 Substitutes 1 if the current input filename is known or 0 if
it is not.
$$ Substitutes the process number of the (parent) shell.
$< Substitutes a line from the standard input, with no further
interpretation thereafter. It can be used to read from the
keyboard in a C shell script.
Command and Filename Substitutions
Command and filename substitutions are applied selectively to the argu‐
ments of built-in commands. Portions of expressions that are not evalu‐
ated are not expanded. For non-built-in commands, filename expansion of
the command name is done separately from that of the argument list; ex‐
pansion occurs in a subshell, after I/O redirection is performed.
Command Substitution
A command enclosed by backquotes (`...`) is performed by a subshell.
Its standard output is broken into separate words at each space charac‐
ter, tab and newline; null words are discarded. This text replaces the
backquoted string on the current command line. Within double-quotes,
only newline characters force new words; space and tab characters are
preserved. However, a final newline is ignored. It is therefore possi‐
ble for a command substitution to yield a partial word.
Filename Substitution
Unquoted words containing any of the characters *, ?, [ or {, or that
begin with ~, are expanded (also known as globbing) to an alphabeti‐
cally sorted list of filenames, as follows:
* Match any (zero or more) characters.
? Match any single character.
[...] Match any single character in the enclosed
list(s) or range(s). A list is a string of
characters. A range is two characters separated
by a dash (−), and includes all the characters
in between in the ASCII collating sequence (see
ascii(7)).
{str, str, ... } Expand to each string (or filename-matching
pattern) in the comma-separated list. Unlike
the pattern-matching expressions above, the ex‐
pansion of this construct is not sorted. For
instance, {b,a} expands to 'b' 'a', (not 'a'
'b'). As special cases, the characters { and },
along with the string {}, are passed undis‐
turbed.
~[user] Your home directory, as indicated by the value
of the variable home, or that of user, as indi‐
cated by the password entry for user.
Only the patterns *, ? and [...] imply pattern matching; an error re‐
sults if no filename matches a pattern that contains them. The '.' (dot
character), when it is the first character in a filename or pathname
component, must be matched explicitly. The / (slash) must also be
matched explicitly.
Expressions and Operators
A number of C shell built-in commands accept expressions, in which the
operators are similar to those of C and have the same precedence. These
expressions typically appear in the @, exit, if, set and while com‐
mands, and are often used to regulate the flow of control for executing
commands. Components of an expression are separated by white space.
Null or missing values are considered 0. The result of all expressions
is a string, which can represent decimal numbers.
The following C shell operators are grouped in order of precedence:
(...) grouping
>~ one's complement
! logical negation
* / % multiplication, division, remainder. These are right
associative, which can lead to unexpected results.
Combinations should be grouped explicitly with
parentheses.
+ − addition, subtraction (also right associative)
<< >> bitwise shift left, bitwise shift right
< > <= >= less than, greater than, less than or equal to,
greater than or equal to
== != =~ !~ equal to, not equal to, filename-substitution pat‐
tern match (described below), filename-substitution
pattern mismatch
& bitwise AND
^ bitwise XOR (exclusive or)
| bitwise inclusive OR
&& logical AND
|| logical OR
The operators: ==, !=, =~, and !~ compare their arguments as strings;
other operators use numbers. The operators =~ and !~ each check whether
or not a string to the left matches a filename substitution pattern on
the right. This reduces the need for switch statements when pattern-
matching between strings is all that is required.
Also available are file inquiries:
-r filename Return true, or 1 if the user has read access. Otherwise
it returns false, or 0.
-w filename True if the user has write access.
-x filename True if the user has execute permission (or search per‐
mission on a directory).
-e filename True if filename exists.
-o filename True if the user owns filename.
-z filename True if filename is of zero length (empty).
-f filename True if filename is a plain file.
-d filename True if filename is a directory.
If filename does not exist or is inaccessible, then all inquiries re‐
turn false.
An inquiry as to the success of a command is also available:
{ command } If command runs successfully, the expression evaluates
to true, 1. Otherwise, it evaluates to false, 0. Note:
Conversely, command itself typically returns 0 when it
runs successfully, or some other value if it encounters
a problem. If you want to get at the status directly,
use the value of the status variable rather than this
expression.
Control Flow
The shell contains a number of commands to regulate the flow of control
in scripts and within limits, from the terminal. These commands operate
by forcing the shell either to reread input (to loop), or to skip input
under certain conditions (to branch).
Each occurrence of a foreach, switch, while, if...then and else built-
in command must appear as the first word on its own input line.
If the shell's input is not seekable and a loop is being read, that in‐
put is buffered. The shell performs seeks within the internal buffer to
accomplish the rereading implied by the loop. (To the extent that this
allows, backward goto commands succeeds on nonseekable inputs.)
Command Execution
If the command is a C shell built-in command, the shell executes it di‐
rectly. Otherwise, the shell searches for a file by that name with exe‐
cute access. If the command name contains a /, the shell takes it as a
pathname, and searches for it. If the command name does not contain a
/, the shell attempts to resolve it to a pathname, searching each di‐
rectory in the path variable for the command. To speed the search, the
shell uses its hash table (see the rehash built-in command) to elimi‐
nate directories that have no applicable files. This hashing can be
disabled with the -c or -t, options, or the unhash built-in command.
As a special case, if there is no / in the name of the script and there
is an alias for the word shell, the expansion of the shell alias is
prepended (without modification) to the command line. The system at‐
tempts to execute the first word of this special (late-occurring)
alias, which should be a full pathname. Remaining words of the alias's
definition, along with the text of the input line, are treated as argu‐
ments.
When a pathname is found that has proper execute permissions, the shell
forks a new process and passes it, along with its arguments, to the
kernel using the execve() system call (see exec(2)). The kernel then
attempts to overlay the new process with the desired program. If the
file is an executable binary (in a.out(5) format) the kernel succeeds
and begins executing the new process. If the file is a text file and
the first line begins with #!, the next word is taken to be the path‐
name of a shell (or command) to interpret that script. Subsequent words
on the first line are taken as options for that shell. The kernel in‐
vokes (overlays) the indicated shell, using the name of the script as
an argument.
If neither of the above conditions holds, the kernel cannot overlay the
file and the execve() call fails (see exec(2)). The C shell then at‐
tempts to execute the file by spawning a new shell, as follows:
o If the first character of the file is a #, a C shell is in‐
voked.
o Otherwise, a Bourne shell is invoked.
Signal Handling
The shell normally ignores QUIT signals. Background jobs are immune to
signals generated from the keyboard, including hangups (HUP). Other
signals have the values that the C shell inherited from its environ‐
ment. The shell's handling of interrupt and terminate signals within
scripts can be controlled by the onintr built-in command. Login shells
catch the TERM signal. Otherwise, this signal is passed on to child
processes. In no case are interrupts allowed when a login shell is
reading the .logout file.
Job Control
The shell associates a numbered job with each command sequence to keep
track of those commands that are running in the background or have been
stopped with TSTP signals (typically Control-z). When a command or com‐
mand sequence (semicolon separated list) is started in the background
using the & metacharacter, the shell displays a line with the job num‐
ber in brackets and a list of associated process numbers:
[1] 1234
To see the current list of jobs, use the jobs built-in command. The job
most recently stopped (or put into the background if none are stopped)
is referred to as the current job and is indicated with a '+'. The pre‐
vious job is indicated with a '−'. When the current job is terminated
or moved to the foreground, this job takes its place (becomes the new
current job).
To manipulate jobs, refer to the bg, fg, kill, stop, and % built-in
commands.
A reference to a job begins with a '%'. By itself, the percent-sign
refers to the current job.
% %+ %% The current job.
%− The previous job.
%j Refer to job j as in: 'kill -9 %j'. j can be a job num‐
ber, or a string that uniquely specifies the command line
by which it was started; 'fg %vi' might bring a stopped vi
job to the foreground, for instance.
%?string Specify the job for which the command line uniquely con‐
tains string.
A job running in the background stops when it attempts to read from the
terminal. Background jobs can normally produce output, but this can be
suppressed using the 'stty tostop' command.
Status Reporting
While running interactively, the shell tracks the status of each job
and reports whenever the job finishes or becomes blocked. It normally
displays a message to this effect as it issues a prompt, in order to
avoid disturbing the appearance of your input. When set, the notify
variable indicates that the shell is to report status changes immedi‐
ately. By default, the notify command marks the current process; after
starting a background job, type notify to mark it.
Commands
Built-in commands are executed within the C shell. If a built-in com‐
mand occurs as any component of a pipeline except the last, it is exe‐
cuted in a subshell.
:
Null command. This command is interpreted, but performs no action.
alias [ name [ def ] ]
Assign def to the alias name. def is a list of words that can con‐
tain escaped history-substitution metasyntax. name is not allowed
to be alias or unalias. If def is omitted, the current definition
for the alias name is displayed. If both name and def are omitted,
all aliases are displayed with their definitions.
bg [ %job ... ]
Run the current or specified jobs in the background.
break
Resume execution after the end of the nearest enclosing foreach or
while loop. The remaining commands on the current line are exe‐
cuted. This allows multilevel breaks to be written as a list of
break commands, all on one line.
breaksw
Break from a switch, resuming after the endsw.
case label:
A label in a switch statement.
cd [dir]
chdir [dir]
Change the shell's working directory to directory dir. If no argu‐
ment is given, change to the home directory of the user. If dir is
a relative pathname not found in the current directory, check for
it in those directories listed in the cdpath variable. If dir is
the name of a shell variable whose value starts with a /, change to
the directory named by that value.
continue
Continue execution of the next iteration of the nearest enclosing
while or foreach loop.
default:
Labels the default case in a switch statement. The default should
come after all case labels. Any remaining commands on the command
line are first executed.
dirs [-l]
Print the directory stack, most recent to the left. The first di‐
rectory shown is the current directory. With the -l argument, pro‐
duce an unabbreviated printout; use of the ~ notation is sup‐
pressed.
echo [-n] list
The words in list are written to the shell's standard output, sepa‐
rated by space characters. The output is terminated with a newline
unless the -n option is used. csh, by default, invokes its built-in
echo, if echo is called without the full pathname of a non-built-in
command, regardless of the configuration of your PATH (see
echo(1)).
eval argument...
Reads the arguments as input to the shell and executes the result‐
ing command(s). This is usually used to execute commands generated
as the result of command or variable substitution.
exec command
Execute command in place of the current shell, which terminates.
exit [(expr)]
The calling shell or shell script exits, either with the value of
the status variable or with the value specified by the expression
expr.
fg [%job]
Bring the current or specified job into the foreground.
foreach var (wordlist)
...
end
The variable var is successively set to each member of wordlist.
The sequence of commands between this command and the matching end
is executed for each new value of var. Both foreach and end must
appear alone on separate lines.
The built-in command continue can be used to terminate the execu‐
tion of the current iteration of the loop and the built-in command
break can be used to terminate execution of the foreach command.
When this command is read from the terminal, the loop is read once
prompting with ? before any statements in the loop are executed.
glob wordlist
Perform filename expansion on wordlist. Like echo, but no \ escapes
are recognized. Words are delimited by NULL characters in the out‐
put.
goto label
The specified label is a filename and a command expanded to yield a
label. The shell rewinds its input as much as possible and searches
for a line of the form label: possibly preceded by space or tab
characters. Execution continues after the indicated line. It is an
error to jump to a label that occurs between a while or for built-
in command and its corresponding end.
hashstat
Print a statistics line indicating how effective the internal hash
table for the path variable has been at locating commands (and
avoiding execs). An exec is attempted for each component of the
path where the hash function indicates a possible hit and in each
component that does not begin with a '/'. These statistics only re‐
flect the effectiveness of the path variable, not the cdpath vari‐
able.
history [-hr] [n]
Display the history list; if n is given, display only the n most
recent events.
-r Reverse the order of printout to be most recent first rather
than oldest first.
-h Display the history list without leading numbers. This is
used to produce files suitable for sourcing using the -h op‐
tion to source.
if (expr) command
If the specified expression evaluates to true, the single command
with arguments is executed. Variable substitution on command hap‐
pens early, at the same time it does for the rest of the if com‐
mand. command must be a simple command, not a pipeline, a command
list, or a parenthesized command list. Note: I/O redirection occurs
even if expr is false, when command is not executed (this is a
bug).
if (expr) then
...
else if (expr2) then
...
else
...
endif
If expr is true, commands up to the first else are executed. Other‐
wise, if expr2 is true, the commands between the else if and the
second else are executed. Otherwise, commands between the else and
the endif are executed. Any number of else if pairs are allowed,
but only one else. Only one endif is needed, but it is required.
The words else and endif must be the first non-whitespace charac‐
ters on a line. The if must appear alone on its input line or after
an else.
jobs [-l]
List the active jobs under job control.
-l List process IDs, in addition to the normal information.
kill [sig] [pid] [%job] ...
kill -l
Send the TERM (terminate) signal, by default, or the signal speci‐
fied, to the specified process ID, the job indicated, or the cur‐
rent job. Signals are either given by number or by name. There is
no default. Typing kill does not send a signal to the current job.
If the signal being sent is TERM (terminate) or HUP (hangup), then
the job or process is sent a CONT (continue) signal as well.
-l List the signal names that can be sent.
limit [-h] [resource [max-use] ]
Limit the consumption by the current process or any process it
spawns, each not to exceed max-use on the specified resource. The
string unlimited requests that the current limit, if any, be re‐
moved. If max-use is omitted, print the current limit. If resource
is omitted, display all limits.
For more information on these resource limits, see getrlimit(2).
-h Use hard limits instead of the current limits. Hard limits
impose a ceiling on the values of the current limits. Only a
process with the {PRIV_SYS_RESOURCE} privilege can raise the
hard limits.
resource is one of:
cputime Maximum CPU seconds per process.
filesize Largest single file allowed. Limited by the
size and capabilities of the filesystem. See
df(8).
datasize (heapsize) Maximum data size (including stack) for the
process. This is the size of your virtual
memory. See swap(8).
stacksize Maximum stack size for the process.
coredumpsize Maximum size of a core dump file.
descriptors Maximum number of file descriptors. See In‐
tro(2).
memorysize Maximum size of virtual memory.
max-use is a number, with an optional scaling factor, as follows:
nh Hours (for cputime).
nk n kilobytes. This is the default for all but cputime.
nm n megabytes or minutes (for cputime).
mm:ss Minutes and seconds (for cputime).
Example of limit: To limit the size of a core file dump to 0
Megabytes, type the following:
limit coredumpsize 0M
login [username|-p]
Terminate a login shell and invoke login(1). The .logout file is
not processed. If username is omitted, login prompts for the name
of a user.
-p Preserve the current environment (variables).
logout
Terminate a login shell.
nice [+n|-n] [command]
Increment the process priority value for the shell or for command
by n. The higher the priority value, the lower the priority of a
process, and the slower it runs. When given, command is always run
in a subshell, and the restrictions placed on commands in simple if
commands apply. If command is omitted, nice increments the value
for the current shell. If no increment is specified, nice sets the
process priority value to 4. The range of process priority values
is from −20 to 20. Values of n outside this range set the value to
the lower, or to the higher boundary, respectively.
+n Increment the process priority value by n.
-n Decrement by n. This argument can be used only in a shell run
with the {PRIV_PROC_PRIOCNTL} privilege.
nohup [command]
Run command with HUPs ignored. With no arguments, ignore HUPs
throughout the remainder of a script. When given, command is always
run in a subshell, and the restrictions placed on commands in sim‐
ple if statements apply. All processes detached with & are effec‐
tively nohup'd.
notify [%job] ...
Notify the user asynchronously when the status of the current job
or specified jobs changes.
onintr [−| label]
Control the action of the shell on interrupts. With no arguments,
onintr restores the default action of the shell on interrupts. (The
shell terminates shell scripts and returns to the terminal command
input level). With the − argument, the shell ignores all inter‐
rupts. With a label argument, the shell executes a goto label when
an interrupt is received or a child process terminates because it
was interrupted.
popd [+n]
Pop the directory stack and cd to the new top directory. The ele‐
ments of the directory stack are numbered from 0 starting at the
top.
+n Discard the n'th entry in the stack.
pushd [+n|dir]
Push a directory onto the directory stack. With no arguments, ex‐
change the top two elements.
+n Rotate the n'th entry to the top of the stack and cd to it.
dir Push the current working directory onto the stack and change
to dir.
rehash
Recompute the internal hash table of the contents of directories
listed in the path variable to account for new commands added. Re‐
compute the internal hash table of the contents of directories
listed in the cdpath variable to account for new directories added.
repeat count command
Repeat command count times. command is subject to the same restric‐
tions as with the one-line if statement.
set [var [= value] ]
set var[n] = word
With no arguments, set displays the values of all shell variables.
Multiword values are displayed as a parenthesized list. With the
var argument alone, set assigns an empty (null) value to the vari‐
able var. With arguments of the form var = value set assigns
value to var, where value is one of:
word A single word (or quoted string).
(wordlist) A space-separated list of words enclosed in parenthe‐
ses.
Values are command and filename expanded before being assigned. The
form setvar[n] = word replaces the n'th word in a multiword value
with word.
setenv [VAR [word]]
With no arguments, setenv displays all environment variables. With
the VAR argument, setenv sets the environment variable VAR to have
an empty (null) value. (By convention, environment variables are
normally given uppercase names.) With both VAR and word arguments,
setenv sets the environment variable NAME to the value word, which
must be either a single word or a quoted string. The most commonly
used environment variables, USER, TERM, and PATH, are automatically
imported to and exported from the csh variables user, term, and
path. There is no need to use setenv for these. In addition, the
shell sets the PWD environment variable from the csh variable cwd
whenever the latter changes.
The environment variables LC_CTYPE, LC_MESSAGES, LC_TIME, LC_COL‐
LATE, LC_NUMERIC, and LC_MONETARY take immediate effect when
changed within the C shell.
If any of the LC_* variables (LC_CTYPE, LC_MESSAGES, LC_TIME,
LC_COLLATE, LC_NUMERIC, and LC_MONETARY) (see environ(7)) are not
set in the environment, the operational behavior of csh for each
corresponding locale category is determined by the value of the
LANG environment variable. If LC_ALL is set, its contents are used
to override both the LANG and the other LC_* variables. If none of
the above variables is set in the environment, the "C" (U.S. style)
locale determines how csh behaves.
LC_CTYPE Determines how csh handles characters. When LC_CTYPE
is set to a valid value, csh can display and handle
text and filenames containing valid characters for
that locale.
LC_MESSAGES Determines how diagnostic and informative messages
are presented. This includes the language and style
of the messages and the correct form of affirmative
and negative responses. In the "C" locale, the mes‐
sages are presented in the default form found in the
program itself (in most cases, U.S./English).
LC_NUMERIC Determines the value of the radix character, decimal
point, (.) in the "C" locale) and thousand separa‐
tor, empty string ("") in the "C" locale).
shift [variable]
The components of argv, or variable, if supplied, are shifted to
the left, discarding the first component. It is an error for the
variable not to be set or to have a null value.
source [-h] name
Reads commands from name. source commands can be nested, but if
they are nested too deeply the shell can run out of file descrip‐
tors. An error in a sourced file at any level terminates all nested
source commands.
-h Place commands from the file name on the history list without
executing them.
stop %jobid ...
Stop the current or specified background job.
stop pid ...
Stop the specified process, pid. (See ps(1)).
suspend
Stop the shell in its tracks, much as if it had been sent a stop
signal with ^Z. This is most often used to stop shells started by
su.
switch (string)
case label:
...
breaksw
...
default:
...
breaksw
endsw
Each label is successively matched, against the specified string,
which is first command and filename expanded. The file metacharac‐
ters *, ? and [...] can be used in the case labels, which are vari‐
able expanded. If none of the labels match before a "default" label
is found, execution begins after the default label. Each case
statement and the default statement must appear at the beginning of
a line. The command breaksw continues execution after the endsw.
Otherwise control falls through subsequent case and default state‐
ments as with C. If no label matches and there is no default, exe‐
cution continues after the endsw.
time [command]
With no argument, print a summary of time used by this C shell and
its children. With an optional command, execute command and print a
summary of the time it uses. The C shell built-in time command does
NOT compute the last 6 fields of output, rendering the output to
erroneously report the value 0 for these fields.
example %time ls -R
9.0u 11.0s 3:32 10% 0+0k 0+0io 0pf+0w
(See the Environment Variables and Predefined Shell Variables sub-
section on the time variable.)
umask [value]
Display the file creation mask. With value, set the file creation
mask. With value given in octal, the user can turn off any bits,
but cannot turn on bits to allow new permissions. Common values in‐
clude 077, restricting all permissions from everyone else; 002,
giving complete access to the group, and read (and directory
search) access to others; or 022, giving read (and directory
search) but not write permission to the group and others.
unalias pattern
Discard aliases that match (filename substitution) pattern. All
aliases are removed by 'unalias *'.
unhash
Disable the internal hash tables for the path and cdpath variables.
unlimit [-h] [resource]
Remove a limitation on resource. If no resource is specified, then
all resource limitations are removed. See the description of the
limit command for the list of resource names.
-h Remove corresponding hard limits. Only a process run with the
{PRIV_PROC_PRIOCNTL} privilege can do this.
unset pattern
Remove variables whose names match (filename substitution) pattern.
All variables are removed by 'unset *'; this has noticeably dis‐
tasteful side effects.
unsetenv variable
Remove variable from the environment. As with unset, pattern match‐
ing is not performed.
wait
Wait for background jobs to finish (or for an interrupt) before
prompting.
while (expr)
...
end
While expr is true (evaluates to nonzero), repeat commands between
the while and the matching end statement. break and continue can be
used to terminate or continue the loop prematurely. The while and
end must appear alone on their input lines. If the shell's input is
a terminal, it prompts for commands with a question-mark until the
end command is entered and then performs the commands in the loop.
% [job] [&]
Bring the current or indicated job to the foreground. With the am‐
persand, continue running job in the background.
@ [var =expr]
@ [var[n]=expr]
With no arguments, display the values for all shell variables. With
arguments, set the variable var, or the n'th word in the value of
var, to the value that expr evaluates to. (If [n] is supplied, both
var and its n'th component must already exist.)
If the expression contains the characters >, <, &, or |, then at
least this part of expr must be placed within parentheses.
The operators *=, +=, and so forth, are available as in C. The
space separating the name from the assignment operator is optional.
Spaces are, however, mandatory in separating components of expr
that would otherwise be single words.
Special postfix operators, ++ and −−, increment or decrement name,
respectively.
Environment Variables and Predefined Shell Variables
Unlike the Bourne shell, the C shell maintains a distinction between
environment variables, which are automatically exported to processes it
invokes, and shell variables, which are not. Both types of variables
are treated similarly under variable substitution. The shell sets the
variables argv, cwd, home, path, prompt, shell, and status upon ini‐
tialization. The shell copies the environment variable USER into the
shell variable user, TERM into term, and HOME into home, and copies
each back into the respective environment variable whenever the shell
variables are reset. PATH and path are similarly handled. You need only
set path once in the .cshrc or .login file. The environment variable
PWD is set from cwd whenever the latter changes. The following shell
variables have predefined meanings:
argv
Argument list. Contains the list of command line arguments supplied
to the current invocation of the shell. This variable determines
the value of the positional parameters $1, $2, and so on.
cdpath
Contains a list of directories to be searched by the cd, chdir, and
popd commands, if the directory argument each accepts is not a sub‐
directory of the current directory.
cwd
The full pathname of the current directory.
echo
Echo commands (after substitutions) just before execution.
fignore
A list of filename suffixes to ignore when attempting filename com‐
pletion. Typically the single word '.o'.
filec
Enable filename completion, in which case the EOT character (typi‐
cally Control-D) and the ESC character have special significance
when typed in at the end of a terminal input line:
EOT Print a list of all filenames that start with the preceding
string.
ESC Replace the preceding string with the longest unambiguous
extension.
hardpaths
If set, pathnames in the directory stack are resolved to contain no
symbolic-link components.
histchars
A two-character string. The first character replaces ! as the his‐
tory-substitution character. The second replaces the carat (^) for
quick substitutions.
history
The number of lines saved in the history list. A very large number
can use up all of the C shell's memory. If not set, the C shell
saves only the most recent command.
home
The user's home directory. The filename expansion of ~ refers to
the value of this variable.
ignoreeof
If set, the shell ignores EOF from terminals. This protects against
accidentally killing a C shell by typing a Control-d.
mail
A list of files where the C shell checks for mail. If the first
word of the value is a number, it specifies a mail checking inter‐
val in seconds (default 5 minutes).
nobeep
Suppress the bell during command completion when asking the C shell
to extend an ambiguous filename.
noclobber
Restrict output redirection so that existing files are not de‐
stroyed by accident. > redirections can only be made to new files.
>> redirections can only be made to existing files.
noglob
Inhibit filename substitution. This is most useful in shell scripts
once filenames (if any) are obtained and no further expansion is
desired.
nonomatch
Return the filename substitution pattern, rather than an error, if
the pattern is not matched. Malformed patterns still result in er‐
rors.
notify
If set, the shell notifies you immediately as jobs are completed,
rather than waiting until just before issuing a prompt.
path
The list of directories in which to search for commands. path is
initialized from the environment variable PATH, which the C shell
updates whenever path changes. A null word ('') specifies the cur‐
rent directory. The default is typically (/usr/bin /usr/sbin). One
can override this initial search path upon csh start-up by setting
it in .cshrc or .login (for login shells only). If path becomes un‐
set, only full pathnames execute. An interactive C shell normally
hashes the contents of the directories listed after reading .cshrc,
and whenever path is reset. If new commands are added, use the re‐
hash command to update the table.
prompt
The string an interactive C shell prompts with. Noninteractive
shells leave the prompt variable unset. Aliases and other commands
in the .cshrc file that are only useful interactively, can be
placed after the following test: 'if ($?prompt == 0) exit', to re‐
duce startup time for noninteractive shells. A ! in the prompt
string is replaced by the current event number. The default prompt
is hostname%, or hostname# for a user with a userid of 0.
The setting of $prompt has three meanings:
$prompt not set non-interactive shell, test $?prompt.
$prompt set but == "" .cshrc called by the which(1) command.
$prompt set and != "" normal interactive shell.
savehist
The number of lines from the history list that are saved in ~/.his‐
tory when the user logs out. Large values for savehist slow down
the C shell during startup.
shell
The file in which the C shell resides. This is used in forking
shells to interpret files that have execute bits set, but that are
not executable by the system.
status
The status returned by the most recent command. If that command
terminated abnormally, 0200 is added to the status. Built-in com‐
mands that fail return exit status 1; all other built-in commands
set status to 0.
time
Control automatic timing of commands. Can be supplied with one or
two values. The first is the reporting threshold in CPU seconds.
The second is a string of tags and text indicating which resources
to report on. A tag is a percent sign (%) followed by a single up‐
percase letter (unrecognized tags print as text):
%D Average amount of unshared data space used in Kilobytes.
%E Elapsed (wallclock) time for the command.
%F Page faults.
%I Number of block input operations.
%K Average amount of unshared stack space used in Kilobytes.
%M Maximum real memory used during execution of the process.
%O Number of block output operations.
%P Total CPU time — U (user) plus S (system) — as a percentage
of E (elapsed) time.
%S Number of seconds of CPU time consumed by the kernel on be‐
half of the user's process.
%U Number of seconds of CPU time devoted to the user's process.
%W Number of swaps.
%X Average amount of shared memory used in Kilobytes.
The default summary display outputs from the %U, %S, %E, %P, %X,
%D, %I, %O, %F, and %W tags, in that order.
verbose
Display each command after history substitution takes place.
FILES
~/.cshrc Read at beginning of execution by each shell.
~/.login Read by login shells after .cshrc at login.
~/.logout Read by login shells at logout.
~/.history Saved history for use at next login.
/usr/bin/sh The system shell, for shell scripts not starting with a
'#'.
/tmp/sh* Temporary file for '<<'.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/core-os _ CSIEnabled _ Interface
StabilityObsolete Committed
SEE ALSO
echo(1), limit(1), login(1), ls(1), more(1), pfcsh(1), pfexec(1),
ps(1), sh(1), shell_builtins(1), tcsh(1), which(1), Intro(2), exec(2),
fork(2), getrlimit(2), pipe(2), termio(4I), a.out(5), ascii(7), attrib‐
utes(7), environ(7), privileges(7), df(8), swap(8)
DIAGNOSTICS
You have stopped jobs. You attempted to exit the C shell with
stopped jobs under job control. An immediate
second attempt to exit succeeds, terminating
the stopped jobs.
WARNINGS
The use of setuid shell scripts is strongly discouraged.
NOTES
Traditional csh may be replaced in a future release of Oracle Solaris
with a comparable shell, such as tcsh(1). It is recommended that csh
users begin migrating their startup files and scripts to tcsh, which is
available in Oracle Solaris through the package: pkg:/shell/tcsh.
/usr/bin/csh in this release is a symbolic link which is set by the im‐
plementation value of the pkg(7) mediator csh to point to either
/usr/sunos/bin/csh (implementation=suncsh) or /usr/bin/tcsh (implemen‐
tation=tcsh).
Words can be no longer than 1024 bytes. The system limits argument
lists to 1,048,576 bytes. However, the maximum number of arguments to a
command for which filename expansion applies is 1706. Command substitu‐
tions can expand to no more characters than are allowed in the argument
list. To detect looping, the shell restricts the number of alias sub‐
stitutions on a single line to 20.
When a command is restarted from a stop, the shell prints the directory
it started in if this is different from the current directory; this can
be misleading (that is, wrong) as the job might have changed directo‐
ries internally.
Shell built-in functions are not stoppable/restartable. Command se‐
quences of the form a b c are also not handled gracefully when stop‐
ping is attempted. If you suspend b, the shell never executes c. This
is especially noticeable if the expansion results from an alias. It can
be avoided by placing the sequence in parentheses to force it into a
subshell.
Commands within loops, prompted for by ?, are not placed in the history
list.
Control structures should be parsed rather than being recognized as
built-in commands. This would allow control commands to be placed any‐
where, to be combined with |, and to be used with & and ; metasyntax.
It should be possible to use the : modifiers on the output of command
substitutions. There are two problems with : modifier usage on variable
substitutions: not all of the modifiers are available, and only one
modifier per substitution is allowed.
The g (global) flag in history substitutions applies only to the first
match in each word, rather than all matches in all words. The common
text editors consistently do the latter when given the g flag in a sub‐
stitution command.
Quoting conventions are confusing. Overriding the escape character to
force variable substitutions within double quotes is counterintuitive
and inconsistent with the Bourne shell.
Symbolic links can fool the shell. Setting the hardpaths variable alle‐
viates this.
It is up to the user to manually remove all duplicate pathnames accrued
from using built-in commands more than once, as shown below:
set path = pathnames
setenv PATH = pathnames
These often occur because a shell script or a .cshrc file does some‐
thing like
´set path=(/usr/local /usr/hosts $path)'
to ensure that the named directories are in the pathname list.
The only way to direct the standard output and standard error sepa‐
rately is by invoking a subshell, as follows:
command > outfile ) >& errorfile
Although robust enough for general use, adventures into the esoteric
periphery of the C shell can reveal unexpected quirks.
If you start csh as a login shell and you do not have a .login in your
home directory, then the csh reads in the /etc/.login.
When the shell executes a shell script that attempts to execute a non-
existent command interpreter, the shell returns an erroneous diagnostic
message that the shell script file does not exist.
BUGS
The time built-in command does not compute the last 6 fields of output,
rendering the output to erroneously report the value 0 for these
fields:
example% time ls -R
9.0u 11.0s 3:32 10% 0+0k 0+0io 0pf+0w
HISTORY
The csh command was installed as /usr/bin/csh in all Sun and Oracle re‐
leases of Solaris prior to Oracle Solaris 11.4.0. Starting in 11.4.0,
this version of csh was moved to /usr/sunos/bin/csh, and the csh
pkg(7) mediator was created to allow sites to choose whether
/usr/bin/csh links to /usr/sunos/bin/csh or tcsh.
Oracle Solaris 11.4 29 Nov 2022 csh(1)