svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
crypto(9)
CRYPTO(9) BSD Kernel Developer's Manual CRYPTO(9)
NAME
crypto — API for cryptographic services in the kernel
SYNOPSIS
#include <opencrypto/cryptodev.h>
int32_t
crypto_get_driverid(device_t, size_t, int);
int
crypto_register(uint32_t, int, uint16_t, uint32_t,
int (*)(void *, uint32_t *, struct cryptoini *),
int (*)(void *, uint64_t), int (*)(void *, struct cryptop *),
void *);
int
crypto_kregister(uint32_t, int, uint32_t,
int (*)(void *, struct cryptkop *), void *);
int
crypto_unregister(uint32_t, int);
int
crypto_unregister_all(uint32_t);
void
crypto_done(struct cryptop *);
void
crypto_kdone(struct cryptkop *);
int
crypto_find_driver(const char *);
int
crypto_newsession(crypto_session_t *, struct cryptoini *, int);
int
crypto_freesession(crypto_session_t);
int
crypto_dispatch(struct cryptop *);
int
crypto_kdispatch(struct cryptkop *);
int
crypto_unblock(uint32_t, int);
struct cryptop *
crypto_getreq(int);
void
crypto_freereq(void);
#define CRYPTO_SYMQ 0x1
#define CRYPTO_ASYMQ 0x2
#define EALG_MAX_BLOCK_LEN 16
struct cryptoini {
int cri_alg;
int cri_klen;
int cri_mlen;
caddr_t cri_key;
uint8_t cri_iv[EALG_MAX_BLOCK_LEN];
struct cryptoini *cri_next;
};
struct cryptodesc {
int crd_skip;
int crd_len;
int crd_inject;
int crd_flags;
struct cryptoini CRD_INI;
#define crd_iv CRD_INI.cri_iv
#define crd_key CRD_INI.cri_key
#define crd_alg CRD_INI.cri_alg
#define crd_klen CRD_INI.cri_klen
struct cryptodesc *crd_next;
};
struct cryptop {
TAILQ_ENTRY(cryptop) crp_next;
crypto_session_t crp_session;
int crp_ilen;
int crp_olen;
int crp_etype;
int crp_flags;
caddr_t crp_buf;
caddr_t crp_opaque;
struct cryptodesc *crp_desc;
int (*crp_callback) (struct cryptop *);
caddr_t crp_mac;
};
struct crparam {
caddr_t crp_p;
u_int crp_nbits;
};
#define CRK_MAXPARAM 8
struct cryptkop {
TAILQ_ENTRY(cryptkop) krp_next;
u_int krp_op; /* ie. CRK_MOD_EXP or other */
u_int krp_status; /* return status */
u_short krp_iparams; /* # of input parameters */
u_short krp_oparams; /* # of output parameters */
uint32_t krp_hid;
struct crparam krp_param[CRK_MAXPARAM];
int (*krp_callback)(struct cryptkop *);
};
DESCRIPTION
crypto is a framework for drivers of cryptographic hardware to register
with the kernel so “consumers” (other kernel subsystems, and users
through the /dev/crypto device) are able to make use of it. Drivers reg‐
ister with the framework the algorithms they support, and provide entry
points (functions) the framework may call to establish, use, and tear
down sessions. Sessions are used to cache cryptographic information in a
particular driver (or associated hardware), so initialization is not
needed with every request. Consumers of cryptographic services pass a
set of descriptors that instruct the framework (and the drivers regis‐
tered with it) of the operations that should be applied on the data (more
than one cryptographic operation can be requested).
Keying operations are supported as well. Unlike the symmetric operators
described above, these sessionless commands perform mathematical opera‐
tions using input and output parameters.
Since the consumers may not be associated with a process, drivers may not
sleep(9). The same holds for the framework. Thus, a callback mechanism
is used to notify a consumer that a request has been completed (the call‐
back is specified by the consumer on a per-request basis). The callback
is invoked by the framework whether the request was successfully com‐
pleted or not. An error indication is provided in the latter case. A
specific error code, EAGAIN, is used to indicate that a session handle
has changed and that the request may be re-submitted immediately with the
new session. Errors are only returned to the invoking function if not
enough information to call the callback is available (meaning, there was
a fatal error in verifying the arguments). For session initialization
and teardown no callback mechanism is used.
The crypto_find_driver() function may be called to return the specific id
of the provided name. If the specified driver could not be found, the
returned id is -1.
The crypto_newsession() routine is called by consumers of cryptographic
services (such as the ipsec(4) stack) that wish to establish a new ses‐
sion with the framework. The second argument contains all the necessary
information for the driver to establish the session. The third argument
is either a specific driver id, or one or both of CRYPTOCAP_F_HARDWARE,
to select hardware devices, or CRYPTOCAP_F_SOFTWARE, to select software
devices. If both are specified, a hardware device will be returned
before a software device will be. On success, the value pointed to by
the first argument will be the opaque session handle. The various fields
in the cryptoini structure are:
cri_alg Contains an algorithm identifier. Currently supported algo‐
rithms are:
CRYPTO_AES_128_NIST_GMAC
CRYPTO_AES_192_NIST_GMAC
CRYPTO_AES_256_NIST_GMAC
CRYPTO_AES_CBC
CRYPTO_AES_ICM
CRYPTO_AES_NIST_GCM_16
CRYPTO_AES_NIST_GMAC
CRYPTO_AES_XTS
CRYPTO_ARC4
CRYPTO_BLF_CBC
CRYPTO_CAMELLIA_CBC
CRYPTO_CAST_CBC
CRYPTO_DEFLATE_COMP
CRYPTO_DES_CBC
CRYPTO_3DES_CBC
CRYPTO_MD5
CRYPTO_MD5_HMAC
CRYPTO_MD5_KPDK
CRYPTO_NULL_HMAC
CRYPTO_NULL_CBC
CRYPTO_RIPEMD160_HMAC
CRYPTO_SHA1
CRYPTO_SHA1_HMAC
CRYPTO_SHA1_KPDK
CRYPTO_SHA2_256_HMAC
CRYPTO_SHA2_384_HMAC
CRYPTO_SHA2_512_HMAC
CRYPTO_SKIPJACK_CBC
cri_klen Specifies the length of the key in bits, for variable-size key
algorithms.
cri_mlen Specifies how many bytes from the calculated hash should be
copied back. 0 means entire hash.
cri_key Contains the key to be used with the algorithm.
cri_iv Contains an explicit initialization vector (IV), if it does not
prefix the data. This field is ignored during initialization
(crypto_newsession). If no IV is explicitly passed (see below
on details), a random IV is used by the device driver process‐
ing the request.
cri_next Contains a pointer to another cryptoini structure. Multiple
such structures may be linked to establish multi-algorithm ses‐
sions (ipsec(4) is an example consumer of such a feature).
The cryptoini structure and its contents will not be modified by the
framework (or the drivers used).
crypto_freesession() is called with the session handle returned by
crypto_newsession() to free the session.
crypto_dispatch() is called to process a request. The various fields in
the cryptop structure are:
crp_session Contains the session handle.
crp_ilen Indicates the total length in bytes of the buffer to be
processed.
crp_olen On return, contains the total length of the result. For
symmetric crypto operations, this will be the same as the
input length. This will be used if the framework needs to
allocate a new buffer for the result (or for re-formatting
the input).
crp_callback This routine is invoked upon completion of the request,
whether successful or not. It is invoked through the
crypto_done() routine. If the request was not successful,
an error code is set in the crp_etype field. It is the
responsibility of the callback routine to set the appropri‐
ate spl(9) level.
crp_etype Contains the error type, if any errors were encountered, or
zero if the request was successfully processed. If the
EAGAIN error code is returned, the session handle has
changed (and has been recorded in the crp_session field).
The consumer should record the new session handle and use
it in all subsequent requests. In this case, the request
may be re-submitted immediately. This mechanism is used by
the framework to perform session migration (move a session
from one driver to another, because of availability, per‐
formance, or other considerations).
Note that this field only makes sense when examined by the
callback routine specified in crp_callback. Errors are
returned to the invoker of crypto_process() only when
enough information is not present to call the callback rou‐
tine (i.e., if the pointer passed is NULL or if no callback
routine was specified).
crp_flags Is a bitmask of flags associated with this request. Cur‐
rently defined flags are:
CRYPTO_F_IMBUF The buffer pointed to by crp_buf is an
mbuf chain.
CRYPTO_F_IOV The buffer pointed to by crp_buf is an
uio structure.
CRYPTO_F_BATCH Batch operation if possible.
CRYPTO_F_CBIMM Do callback immediately instead of doing
it from a dedicated kernel thread.
CRYPTO_F_DONE Operation completed.
CRYPTO_F_CBIFSYNC Do callback immediately if operation is
synchronous (that the driver specified
the CRYPTOCAP_F_SYNC flag).
CRYPTO_F_ASYNC Try to do the crypto operation in a pool
of workers if the operation is synchro‐
nous (that is, if the driver specified
the CRYPTOCAP_F_SYNC flag). It aims to
speed up processing by dispatching
crypto operations on different proces‐
sors.
CRYPTO_F_ASYNC_KEEPORDER
Dispatch callbacks in the same order
they are posted. Only relevant if the
CRYPTO_F_ASYNC flag is set and if the
operation is synchronous.
crp_buf Points to the input buffer. On return (when the callback
is invoked), it contains the result of the request. The
input buffer may be an mbuf chain or a contiguous buffer,
depending on crp_flags.
crp_opaque This is passed through the crypto framework untouched and
is intended for the invoking application's use.
crp_desc This is a linked list of descriptors. Each descriptor pro‐
vides information about what type of cryptographic opera‐
tion should be done on the input buffer. The various
fields are:
crd_iv When the flag CRD_F_IV_EXPLICIT is set, this
field contains the IV.
crd_key When the CRD_F_KEY_EXPLICIT flag is set, the
crd_key points to a buffer with encryption or
authentication key.
crd_alg An algorithm to use. Must be the same as the
one given at newsession time.
crd_klen The crd_key key length.
crd_skip The offset in the input buffer where processing
should start.
crd_len How many bytes, after crd_skip, should be pro‐
cessed.
crd_inject The crd_inject field specifies an offset in
bytes from the beginning of the buffer. For
encryption algorithms, this may be where the IV
will be inserted when encrypting or where the
IV may be found for decryption (subject to
crd_flags). For MAC algorithms, this is where
the result of the keyed hash will be inserted.
crd_flags The following flags are defined:
CRD_F_ENCRYPT
For encryption algorithms, this bit is set
when encryption is required (when not set,
decryption is performed).
CRD_F_IV_PRESENT
For encryption, if this bit is not set the
IV used to encrypt the packet will be
written at the location pointed to by
crd_inject. The IV length is assumed to
be equal to the blocksize of the encryp‐
tion algorithm. For encryption, if this
bit is set, nothing is done. For decryp‐
tion, this flag has no meaning. Applica‐
tions that do special “IV cooking”, such
as the half-IV mode in ipsec(4), can use
this flag to indicate that the IV should
not be written on the packet. This flag
is typically used in conjunction with the
CRD_F_IV_EXPLICIT flag.
CRD_F_IV_EXPLICIT
This bit is set when the IV is explicitly
provided by the consumer in the crd_iv
field. Otherwise, for encryption opera‐
tions the IV is provided for by the driver
used to perform the operation, whereas for
decryption operations the offset of the IV
is provided by the crd_inject field. This
flag is typically used when the IV is cal‐
culated “on the fly” by the consumer, and
does not precede the data (some ipsec(4)
configurations, and the encrypted swap are
two such examples).
CRD_F_KEY_EXPLICIT
For encryption and authentication (MAC)
algorithms, this bit is set when the key
is explicitly provided by the consumer in
the crd_key field for the given operation.
Otherwise, the key is taken at newsession
time from the cri_key field. As calculat‐
ing the key schedule may take a while, it
is recommended that often used keys are
given their own session.
CRD_F_COMP
For compression algorithms, this bit is
set when compression is required (when not
set, decompression is performed).
CRD_INI This cryptoini structure will not be modified
by the framework or the device drivers. Since
this information accompanies every crypto‐
graphic operation request, drivers may re-ini‐
tialize state on-demand (typically an expensive
operation). Furthermore, the cryptographic
framework may re-route requests as a result of
full queues or hardware failure, as described
above.
crd_next Point to the next descriptor. Linked opera‐
tions are useful in protocols such as ipsec(4),
where multiple cryptographic transforms may be
applied on the same block of data.
crypto_getreq() allocates a cryptop structure with a linked list of as
many cryptodesc structures as were specified in the argument passed to
it.
crypto_freereq() deallocates a structure cryptop and any cryptodesc
structures linked to it. Note that it is the responsibility of the call‐
back routine to do the necessary cleanups associated with the opaque
field in the cryptop structure.
crypto_kdispatch() is called to perform a keying operation. The various
fields in the cryptkop structure are:
krp_op Operation code, such as CRK_MOD_EXP.
krp_status Return code. This errno-style variable indicates whether
lower level reasons for operation failure.
krp_iparams Number if input parameters to the specified operation.
Note that each operation has a (typically hardwired) number
of such parameters.
krp_oparams Number if output parameters from the specified operation.
Note that each operation has a (typically hardwired) number
of such parameters.
krp_kvp An array of kernel memory blocks containing the parameters.
krp_hid Identifier specifying which low-level driver is being used.
krp_callback Callback called on completion of a keying operation.
DRIVER-SIDE API
The crypto_get_driverid(), crypto_get_driver_session(),
crypto_register(), crypto_kregister(), crypto_unregister(),
crypto_unblock(), and crypto_done() routines are used by drivers that
provide support for cryptographic primitives to register and unregister
with the kernel crypto services framework.
Drivers must first use the crypto_get_driverid() function to acquire a
driver identifier, specifying the flags as an argument. One of
CRYPTOCAP_F_SOFTWARE or CRYPTOCAP_F_HARDWARE must be specified. The
CRYPTOCAP_F_SYNC may also be specified, and should be specified if the
driver does all of it's operations synchronously. Drivers must pass the
size of their session struct as the second argument. An appropriately
sized memory will be allocated by the framework, zeroed, and passed to
the driver's newsession() method.
For each algorithm the driver supports, it must then call
crypto_register(). The first two arguments are the driver and algorithm
identifiers. The next two arguments specify the largest possible opera‐
tor length (in bits, important for public key operations) and flags for
this algorithm. The last four arguments must be provided in the first
call to crypto_register() and are ignored in all subsequent calls. They
are pointers to three driver-provided functions that the framework may
call to establish new cryptographic context with the driver, free already
established context, and ask for a request to be processed (encrypt,
decrypt, etc.); and an opaque parameter to pass when calling each of
these routines.
crypto_unregister() is called by drivers that wish to withdraw support
for an algorithm. The two arguments are the driver and algorithm identi‐
fiers, respectively. Typically, drivers for PCMCIA crypto cards that are
being ejected will invoke this routine for all algorithms supported by
the card. crypto_unregister_all() will unregister all algorithms regis‐
tered by a driver and the driver will be disabled (no new sessions will
be allocated on that driver, and any existing sessions will be migrated
to other drivers). The same will be done if all algorithms associated
with a driver are unregistered one by one. After a call to
crypto_unregister_all() there will be no threads in either the newsession
or freesession function of the driver.
The calling convention for the driver-supplied routines are:
int (*newsession)(device_t, crypto_session_t, struct cryptoini *);
void (*freesession)(device_t, crypto_session_t);
int (*process)(device_t, struct cryptop *, int);
int (*kprocess)(device_t, struct cryptkop *, int);
On invocation, the first argument to all routines is the device_t that
was provided to crypto_get_driverid(). The second argument to
newsession() is the opaque session handle for the new session. The third
argument is identical to that of crypto_newsession().
Drivers obtain a pointer to their session memory by invoking
crypto_get_driver_session() on the opaque crypto_session_t handle.
The freesession() routine takes as arguments the opaque data value and
the session handle. It should clear any context associated with the ses‐
sion (clear hardware registers, memory, etc.). If no resources need to
be released other than the contents of session memory, the method is
optional. The crypto framework will zero and release the allocated ses‐
sion memory (after running the freesession() method, if one exists).
The process() routine is invoked with a request to perform crypto pro‐
cessing. This routine must not block or sleep, but should queue the
request and return immediately or process the request to completion. In
case of an unrecoverable error, the error indication must be placed in
the crp_etype field of the cryptop structure. When the request is com‐
pleted, or an error is detected, the process() routine must invoke
crypto_done(). Session migration may be performed, as mentioned previ‐
ously.
In case of a temporary resource exhaustion, the process() routine may
return ERESTART in which case the crypto services will requeue the
request, mark the driver as “blocked”, and stop submitting requests for
processing. The driver is then responsible for notifying the crypto ser‐
vices when it is again able to process requests through the
crypto_unblock() routine. This simple flow control mechanism should only
be used for short-lived resource exhaustion as it causes operations to be
queued in the crypto layer. Doing so is preferable to returning an error
in such cases as it can cause network protocols to degrade performance by
treating the failure much like a lost packet.
The kprocess() routine is invoked with a request to perform crypto key
processing. This routine must not block, but should queue the request
and return immediately. Upon processing the request, the callback rou‐
tine should be invoked. In case of an unrecoverable error, the error
indication must be placed in the krp_status field of the cryptkop struc‐
ture. When the request is completed, or an error is detected, the
kprocess() routine should invoked crypto_kdone().
RETURN VALUES
crypto_register(), crypto_kregister(), crypto_unregister(),
crypto_newsession(), crypto_freesession(), and crypto_unblock() return 0
on success, or an error code on failure. crypto_get_driverid() returns a
non-negative value on error, and -1 on failure. crypto_getreq() returns
a pointer to a cryptop structure and NULL on failure. crypto_dispatch()
returns EINVAL if its argument or the callback function was NULL, and 0
otherwise. The callback is provided with an error code in case of fail‐
ure, in the crp_etype field.
FILES
sys/opencrypto/crypto.c most of the framework code
SEE ALSO
crypto(4), ipsec(4), crypto(7), malloc(9), sleep(9)
HISTORY
The cryptographic framework first appeared in OpenBSD 2.7 and was written
by Angelos D. Keromytis <angelos@openbsd.org>.
BUGS
The framework currently assumes that all the algorithms in a
crypto_newsession() operation must be available by the same driver. If
that is not the case, session initialization will fail.
The framework also needs a mechanism for determining which driver is best
for a specific set of algorithms associated with a session. Some type of
benchmarking is in order here.
Multiple instances of the same algorithm in the same session are not sup‐
ported.
BSD July 17, 2018 BSD