svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
cpc_bind_cpu(3cpc)
cpc...rlwp(3CPC) CPU Performance Counters Library Functions cpc...rlwp(3CPC)
NAME
cpc_bind_curlwp, cpc_bind_pctx, cpc_bind_cpu, cpc_unbind, cpc_re‐
quest_preset, cpc_set_restart - bind request sets to hardware counters
SYNOPSIS
cc [ flag... ] file... -lcpc [ library... ]
#include <libcpc.h>
int cpc_bind_curlwp(cpc_t *cpc, cpc_set_t *set, uint_t flags);
int cpc_bind_pctx(cpc_t *cpc, pctx_t *pctx, id_t id, cpc_set_t *set,
uint_t flags);
int cpc_bind_cpu(cpc_t *cpc, processorid_t id, cpc_set_t *set,
uint_t flags);
int cpc_unbind(cpc_t *cpc, cpc_set_t *set);
int cpc_request_preset(cpc_t *cpc, int index, uint64_t preset);
int cpc_set_restart(cpc_t *cpc, cpc_set_t *set);
DESCRIPTION
These functions program the processor's hardware counters according to
the requests contained in the set argument. If these functions are suc‐
cessful, then upon return the physical counters will have been assigned
to count events on behalf of each request in the set, and each counter
will be enabled as configured.
The cpc_bind_curlwp() function binds the set to the calling LWP. If
successful, a performance counter context is associated with the LWP
that allows the system to virtualize the hardware counters and the
hardware sampling to that specific LWP.
By default, the system binds the set to the current LWP only. If the
CPC_BIND_LWP_INHERIT flag is present in the flags argument, however,
any subsequent LWPs created by the current LWP will inherit a copy of
the request set. The newly created LWP will have its virtualized 64-bit
counters initialized to the preset values specified in set, and the
counters will be enabled and begin counting and sampling events on be‐
half of the new LWP. This automatic inheritance behavior can be useful
when dealing with multithreaded programs to determine aggregate statis‐
tics for the program as a whole.
If the CPC_BIND_LWP_INHERIT flag is specified and any of the requests
in the set have the CPC_OVF_NOTIFY_EMT flag set, the process will imme‐
diately dispatch a SIGEMT signal to the freshly created LWP so that it
can preset its counters appropriately on the new LWP. For the CPC re‐
quest, this initialization condition can be detected using cpc_set_sam‐
ple(3CPC) and looking at the counter value for any requests with
CPC_OVF_NOTIFY_EMT set. The value of any such counters will be
UINT64_MAX. For the SMPL request, no special value returned by
cpc_set_sample(3CPC) is prepared to tell the initialization condition
of the freshly created LWP.
The cpc_bind_pctx() function binds the set to the LWP specified by the
pctx-id pair, where pctx refers to a handle returned from libpctx and
id is the ID of the desired LWP in the target process. If successful, a
performance counter context is associated with the specified LWP and
the system virtualizes the hardware counters to that specific LWP. The
flags argument is reserved for future use and must always be 0.
The cpc_bind_cpu() function binds the set to the specified CPU and mea‐
sures events occurring on that CPU regardless of which LWP is running.
Only one such binding can be active on the specified CPU at a time. As
long as any application has bound a set to a CPU, per-LWP counters are
unavailable and any attempt to use either cpc_bind_curlwp() or
cpc_bind_pctx() returns EAGAIN.
The purpose of the flags argument is to modify the behavior of
cpc_bind_cpu() to adapt to different calling strategies.
Values for the flags argument are defined in <libcpc.h> as follows:
#define CPC_FLAGS_DEFAULT 0
#define CPC_FLAGS_NORELE 0x01
#define CPC_FLAGS_NOPBIND 0x02
When flags is set to CPC_FLAGS_DEFAULT, the library binds the calling
LWP to the measured CPU with processor_bind(2). The application must
not change its processor binding until after it has unbound the set
with cpc_unbind().
The remaining flags may be used individually or bitwise-OR'ed together.
When only CPC_FLAGS_NORELE is asserted, the library binds the set to
the measured CPU using processor_bind(). When the set is unbound using
cpc_unbind(), the library will unbind the set but will not unbind the
calling thread from the measured CPU.
When only CPC_FLAGS_NOPBIND is asserted, the library does not bind the
calling thread the measured CPU when binding the counter set, with the
expectation that the calling thread is already bound to the measured
CPU. If the thread is not bound to the CPU, the function will fail.
When the set is unbound using cpc_unbind(), the library will unbind the
set and the calling thread from the measured CPU.
If both flags are asserted (CPC_FLAGS_NOPBIND|CPC_FLAGS_NORELE), the
set is bound and unbound from the measured CPU but the calling thread's
CPU binding is never altered.
The intended use of CPC_FLAGS_NOPBIND and CPC_FLAGS_NORELE is to allow
a thread to cycle through a collection of counter sets without incur‐
ring overhead from altering the calling thread's CPU binding unneces‐
sarily.
The cpc_request_preset() function updates the preset and current value
stored in the indexed request within the currently bound set, thereby
changing the starting value for the specified request for the calling
LWP only, which takes effect at the next call to cpc_set_restart().
When a performance counter counting on behalf of a request with the
CPC_OVF_NOTIFY_EMT flag set overflows, the performance counters are
frozen and the LWP to which the set is bound receives a SIGEMT signal.
The cpc_set_restart() function can be called from a SIGEMT signal han‐
dler function to quickly restart the hardware counters. Counting begins
from each request's original preset (see cpc_set_add_request(3CPC)), or
from the preset specified in a prior call to cpc_request_preset(). Ap‐
plications performing performance counter overflow profiling should use
the cpc_set_restart() function to quickly restart counting after re‐
ceiving a SIGEMT overflow signal and recording any relevant program
state.
When a hardware sampling for a SMPL request with the CPC_OVF_NOTIFY_EMT
flag set collected the requested number of SMPL records, the LWP to
which the set is bound receives a SIGEMT signal, but the hardware sam‐
pling would not be frozen unlike the CPC request. In the signal handler
for the SIGEMT, if the application wants to temporarily stop the hard‐
ware sampling, cpc_disable(3CPC) can be called to stop the hardware
sampling. And, cpc_enable(3CPC) can be called to restart the hardware
sampling.
The cpc_unbind() function unbinds the set from the resource to which it
is bound. All hardware resources associated with the bound set are
freed. If the set was bound to a CPU, the calling LWP is unbound from
the corresponding CPU according to the policy requested when the set
was bound using cpc_bind_cpu().
RETURN VALUES
Upon successful completion these functions return 0. Otherwise, -1 is
returned and errno is set to indicate the error.
ERRORS
Applications wanting to get detailed error values should register an
error handler with cpc_seterrhndlr(3CPC). Otherwise, the library will
output a specific error description to stderr.
These functions will fail if:
EACCES For cpc_bind_curlwp(), the system has Pentium 4 processors
with HyperThreading and at least one physical processor has
more than one hardware thread online. See NOTES.
For cpc_bind_cpu(), the process does not have the cpc_cpu
privilege to access the CPU's counters.
For cpc_bind_curlwp(), cpc_bind_cpc(), and cpc_bind_pctx(),
access to the requested hypervisor event was denied.
EAGAIN For cpc_bind_curlwp() and cpc_bind_pctx(), the performance
counters are not available for use by the application.
For cpc_bind_cpu(), another process has already bound to
this CPU. Only one process is allowed to bind to a CPU at a
time and only one set can be bound to a CPU at a time.
EINVAL The set does not contain any requests or cpc_set_add_re‐
quest() was not called.
The value given for an attribute of a request is out of
range.
The system could not assign a physical counter to each re‐
quest in the system. See NOTES.
One or more requests in the set conflict and might not be
programmed simultaneously.
The set was not created with the same cpc handle.
For cpc_bind_cpu(), the specified processor does not exist.
For cpc_unbind(), the set is not bound.
For cpc_request_preset() and cpc_set_restart(), the calling
LWP does not have a bound set.
ENOSYS For cpc_bind_cpu(), the specified processor is not online.
ENOTSUP The cpc_bind_curlwp() function was called with the
CPC_OVF_NOTIFY_EMT flag, but the underlying processor is not
capable of detecting counter overflow.
ESRCH For cpc_bind_pctx(), the specified LWP in the target process
does not exist.
EXAMPLES
Example 1 Use hardware performance counters to measure events in a
process.
The following example demonstrates how a standalone application can be
instrumented with the libcpc(3LIB) functions to use hardware perfor‐
mance counters to measure events in a process. The application performs
20 iterations of a computation, measuring the counter values for each
iteration. By default, the example makes use of two counters to measure
external cache references and external cache hits. These options are
only appropriate for UltraSPARC processors. By setting the EVENT0 and
EVENT1 environment variables to other strings (a list of which can be
obtained from the -h option of the cpustat(8) or cputrack(1) utili‐
ties), other events can be counted. The error() routine is assumed to
be a user-provided routine analogous to the familiar printf(3C) func‐
tion from the C library that also performs an exit(2) after printing
the message.
#include <inttypes.h>
#include <stdlib.h>
#include <stdio.h>
#include <unistd.h>
#include <libcpc.h>
#include <errno.h>
int
main(int argc, char *argv[])
{
int iter;
char *event0 = NULL, *event1 = NULL;
cpc_t *cpc;
cpc_set_t *set;
cpc_buf_t *diff, *after, *before;
int ind0, ind1;
uint64_t val0, val1;
if ((cpc = cpc_open(CPC_VER_CURRENT)) == NULL)
error("perf counters unavailable: %s", strerror(errno));
if ((event0 = getenv("EVENT0")) == NULL)
event0 = "EC_ref";
if ((event1 = getenv("EVENT1")) == NULL)
event1 = "EC_hit";
if ((set = cpc_set_create(cpc)) == NULL)
error("could not create set: %s", strerror(errno));
if ((ind0 = cpc_set_add_request(cpc, set, event0, 0, CPC_COUNT_USER, 0,
NULL)) == -1)
error("could not add first request: %s", strerror(errno));
if ((ind1 = cpc_set_add_request(cpc, set, event1, 0, CPC_COUNT_USER, 0,
NULL)) == -1)
error("could not add first request: %s", strerror(errno));
if ((diff = cpc_buf_create(cpc, set)) == NULL)
error("could not create buffer: %s", strerror(errno));
if ((after = cpc_buf_create(cpc, set)) == NULL)
error("could not create buffer: %s", strerror(errno));
if ((before = cpc_buf_create(cpc, set)) == NULL)
error("could not create buffer: %s", strerror(errno));
if (cpc_bind_curlwp(cpc, set, 0) == -1)
error("cannot bind lwp%d: %s", _lwp_self(), strerror(errno));
for (iter = 1; iter <= 20; iter++) {
if (cpc_set_sample(cpc, set, before) == -1)
break;
/* ==> Computation to be measured goes here <== */
if (cpc_set_sample(cpc, set, after) == -1)
break;
cpc_buf_sub(cpc, diff, after, before);
cpc_buf_get(cpc, diff, ind0, &val0);
cpc_buf_get(cpc, diff, ind1, &val1);
(void) printf("%3d: %" PRId64 " %" PRId64 "\n", iter,
val0, val1);
}
if (iter != 21)
error("cannot sample set: %s", strerror(errno));
cpc_close(cpc);
return (0);
}
Example 2 Write a signal handler to catch overflow signals.
The following example builds on Example 1 and demonstrates how to write
the signal handler to catch overflow signals. A counter is preset so
that it is 1000 counts short of overflowing. After 1000 counts the sig‐
nal handler is invoked.
The signal handler:
cpc_t *cpc;
cpc_set_t *set;
cpc_buf_t *buf;
int index;
void
emt_handler(int sig, siginfo_t *sip, void *arg)
{
ucontext_t *uap = arg;
uint64_t val;
if (sig != SIGEMT || sip->si_code != EMT_CPCOVF) {
psignal(sig, "example");
psiginfo(sip, "example");
return;
}
(void) printf("lwp%d - si_addr %p ucontext: %%pc %p %%sp %p\n",
_lwp_self(), (void *)sip->si_addr,
(void *)uap->uc_mcontext.gregs[PC],
(void *)uap->uc_mcontext.gregs[SP]);
if (cpc_set_sample(cpc, set, buf) != 0)
error("cannot sample: %s", strerror(errno));
cpc_buf_get(cpc, buf, index, &val);
(void) printf("0x%" PRIx64"\n", val);
(void) fflush(stdout);
/*
* Update a request's preset and restart the counters. Counters which
* have not been preset with cpc_request_preset() will resume counting
* from their current value.
*/
(cpc_request_preset(cpc, ind1, val1) != 0)
error("cannot set preset for request %d: %s", ind1,
strerror(errno));
if (cpc_set_restart(cpc, set) != 0)
error("cannot restart lwp%d: %s", _lwp_self(), strerror(errno));
}
The setup code, which can be positioned after the code that opens the
CPC library and creates a set:
#define PRESET (UINT64_MAX - 999ull)
struct sigaction act;
...
act.sa_sigaction = emt_handler;
bzero(&act.sa_mask, sizeof (act.sa_mask));
act.sa_flags = SA_RESTART|SA_SIGINFO;
if (sigaction(SIGEMT, &act, NULL) == -1)
error("sigaction: %s", strerror(errno));
if ((index = cpc_set_add_request(cpc, set, event, PRESET,
CPC_COUNT_USER | CPC_OVF_NOTIFY_EMT, 0, NULL)) != 0)
error("cannot add request to set: %s", strerror(errno));
if ((buf = cpc_buf_create(cpc, set)) == NULL)
error("cannot create buffer: %s", strerror(errno));
if (cpc_bind_curlwp(cpc, set, 0) == -1)
error("cannot bind lwp%d: %s", _lwp_self(), strerror(errno));
for (iter = 1; iter <= 20; iter++) {
/* ==> Computation to be measured goes here <== */
}
cpc_unbind(cpc, set); /* done */
Example 3 Use Hardware Performance Counters and Hardware Sampling to
Measure Events in a Process
The following example demonstrates how a standalone application can be
instrumented with the libcpc(3LIB) functions to use hardware perfor‐
mance counters and hardware sampling to measure events in a process on
an Intel platform supporting the Precise Event Based Sampling (PEBS).
The sample code binds two monitoring events for the hardware perfor‐
mance counters and two monitoring events for the hardware sampling to
the current thread. If any monitoring request caused an overflow, the
signal handler invoked by a SIGEMT signal retrieves the monitoring re‐
sults. When the sample code finishes the task that would be coded in
the section commented as Do something here, the sample code retrieves
the monitoring results and closes the session.
#include <stdio.h>
#include <libcpc.h>
#include <unistd.h>
#include <stdlib.h>
#include <errno.h>
#define NEVENTS 4
#define EVENT0 "mem_uops_retired.all_loads"
#define EVENT1 "mem_uops_retired.all_stores"
#define EVENT2 "uops_retired.all"
#define EVENT3 "mem_trans_retired.load_latency"
#define RATIO0 0x100000ULL
#define RATIO1 0x100000ULL
#define RATIO2 0x100000ULL
#define RATIO3 0x100000ULL
#define PRESET_VALUE0 (UINT64_MAX - RATIO0)
#define PRESET_VALUE1 (UINT64_MAX - RATIO1)
#define PRESET_VALUE2 (UINT64_MAX - RATIO2)
#define PRESET_VALUE3 (UINT64_MAX - RATIO3)
typedef struct _rec_names {
const char *name;
int index;
struct _rec_names *next;
} rec_names_t;
typedef struct _rec_items {
uint_t max_idx;
rec_names_t *rec_names;
} rec_items_t;
typedef struct {
char *event;
uint64_t preset;
uint_t flag;
cpc_attr_t *attr;
int nattr;
int *recitems;
uint_t rec_count;
int idx;
int nrecs;
rec_items_t *ri;
} events_t;
static cpc_attr_t attr2[] = {{ "smpl_nrecs", 50 }};
static cpc_attr_t attr3[] = {{ "smpl_nrecs", 10 }, { "ld_lat_threshold", 100 }};
static events_t events[NEVENTS] = {
{
EVENT0, PRESET_VALUE0,
CPC_COUNT_USER | CPC_OVF_NOTIFY_EMT,
NULL, 0, NULL, 0, 0, 0
},
{
EVENT1, PRESET_VALUE1,
CPC_COUNT_USER | CPC_OVF_NOTIFY_EMT,
NULL, 0, NULL, 0, 0, 0
},
{
EVENT2, PRESET_VALUE2,
CPC_COUNT_USER | CPC_OVF_NOTIFY_EMT | CPC_HW_SMPL,
attr2, 1, NULL, 0, 0, 0
},
{
EVENT3, PRESET_VALUE3,
CPC_COUNT_USER | CPC_OVF_NOTIFY_EMT | CPC_HW_SMPL,
attr3, 2, NULL, 0, 0, 0
}
};
static int err;
static cpc_t *cpc;
static cpc_set_t *cpc_set;
static cpc_buf_t *cpc_buf_sig;
/* ARGSUSED */
static void
mk_rec_items(void *arg, cpc_set_t *set, int request_index, const char *name,
int rec_idx)
{
events_t *ev = (events_t *)arg;
rec_names_t *p, *q, *nn;
if ((nn = malloc(sizeof (rec_names_t))) == NULL)
return;
nn->name = name;
nn->index = rec_idx;
p = NULL;
q = ev->ri->rec_names;
while (q != NULL) {
if (rec_idx < q->index)
break;
p = q;
q = q->next;
}
nn->next = q;
if (p == NULL)
ev->ri->rec_names = nn;
else
p->next = nn;
if (ev->ri->max_idx < rec_idx)
ev->ri->max_idx = rec_idx;
}
static rec_names_t *
find_recitem(events_t *ev, int index)
{
rec_names_t *p = ev->ri->rec_names;
while (p != NULL) {
if (p->index == index)
return (p);
else if (p->index > index)
return (NULL);
else
p = p->next;
}
return (NULL);
}
static int
setup_recitems(events_t *ev)
{
if ((ev->ri = calloc(1, sizeof (rec_items_t))) == NULL)
return (-1);
errno = 0;
cpc_walk_smpl_recitems_req(cpc, cpc_set, ev->idx, ev, mk_rec_items);
if (errno != 0)
return (-1);
return (0);
}
static void
show_record(uint64_t *rec, events_t *ev)
{
rec_names_t *item;
int i;
(void) printf("----------------------------------\en");
for (i = 0; i <= ev->ri->max_idx; i++) {
if ((item = find_recitem(ev, i)) == NULL) {
continue;
}
(void) printf("%02d: \"%s\": 0x%" PRIx64 "\en",
i, item->name, rec[i]);
}
(void) printf("----------------------------------\en");
}
static void
show_buf_header(cpc_buf_t *buf)
{
hrtime_t ht;
uint64_t tick;
(void) printf("***************** results *****************\en");
ht = cpc_buf_hrtime(cpc, buf);
(void) printf("hrtime: %" PRId64 \en", ht);
tick = cpc_buf_tick(cpc, buf);
(void) printf("tick: %" PRIu64 \en", tick);
}
static void
show_cpc_buf(cpc_buf_t *buf, events_t *ev)
{
uint64_t val;
(void) printf("Req#%d:"\en", ev->idx);
if (cpc_buf_get(cpc, buf, ev->idx, &val) != 0) {
err = 1;
return;
}
(void) printf(" counter val: 0x%" PRIx64, val);
if (val < ev->preset)
(void) printf(" : overflowed\en");
else
(void) printf("\en");
}
static void
show_smpl_buf(cpc_buf_t *buf, events_t *ev)
{
uint64_t *recb;
int i;
(void) printf("Req#%d:\en", ev->idx);
(void) printf(" retrieved count: %u", ev->rec_count);
if (ev->rec_count == ev->nrecs)
(void) printf(" : overflowed\en");
else
(void) printf("\en");
for (i = 0; i < ev->rec_count; i++) {
recb = cpc_buf_smpl_get_record(cpc, buf, ev->idx, i);
if (recb == NULL) {
err = 1;
return;
}
show_record(recb, ev);
}
}
static int
retrieve_results(cpc_buf_t *buf)
{
int i;
int repeat = 0;
if (cpc_set_sample(cpc, cpc_set, buf) != 0) {
return (-1);
}
show_buf_header(buf);
/* Show CPC results */
for (i = 0; i < NEVENTS; i++) {
if (!(events[i].flag & CPC_HW_SMPL)) {
/* CPC request */
show_cpc_buf(buf, &events[i]);
continue;
}
/* SMPL request */
if (cpc_buf_smpl_rec_count(cpc, buf,
events[i].idx, &events[i].rec_count) != 0) {
return (-1);
}
if (events[i].rec_count > 0)
show_smpl_buf(buf, &events[i]);
if (events[i].rec_count == events[i].nrecs)
repeat++;
}
/* Show remaining SMPL results */
while (repeat > 0) {
if (cpc_set_sample(cpc, cpc_set, buf) != 0)
return (-1);
repeat = 0;
for (i = 0; i < NEVENTS; i++) {
if (!(events[i].flag & CPC_HW_SMPL)) {
/* CPC request */
continue;
}
if (cpc_buf_smpl_rec_count(cpc, buf,
events[i].idx, &events[i].rec_count) != 0) {
return (-1);
}
if (events[i].rec_count > 0) {
(void) printf("For req#%d, more than 1 "
"retrieval of the sampling results "
"were required. Consider to adjust "
"the preset value and smpl_nrecs "
"value.\en", i);
show_smpl_buf(buf, &events[i]);
}
if (events[i].rec_count == events[i].nrecs)
repeat++;
}
}
/* flushed all SMPL results */
return (0);
}
/* ARGSUSED */
static void
sig_handler(int sig, siginfo_t *sip, void *arg)
{
(void) fprintf(stdout, "signal handler called\en");
if (sig != SIGEMT || sip == NULL || sip->si_code != EMT_CPCOVF) {
err = 1;
return;
}
/* Disable all requests */
if (cpc_disable(cpc) != 0) {
err = 1;
return;
}
if (retrieve_results(cpc_buf_sig) != 0) {
err = 1;
return;
}
/* Enable all requests */
if (cpc_enable(cpc) != 0) {
err = 1;
return;
}
/* Restart and reset requests */
if (cpc_set_restart(cpc, cpc_set) != 0) {
err = 1;
return;
}
}
int
main(void)
{
struct sigaction sa;
events_t *ev;
cpc_buf_t *cpc_buf;
int i;
int result = 0;
if ((cpc = cpc_open(CPC_VER_CURRENT)) == NULL) {
(void) fprintf(stderr, "cpc_open() failed\en");
exit(1);
}
if ((cpc_caps(cpc) & CPC_CAP_OVERFLOW_SMPL) == 0) {
(void) fprintf(stderr, "OVERFLOW CAP is missing\en");
result = -2;
goto cleanup_close;
}
if ((cpc_caps(cpc) & CPC_CAP_SMPL) == 0) {
(void) fprintf(stderr, "HW SMPL CAP is missing\en");
result = -2;
goto cleanup_close;
}
if ((cpc_set = cpc_set_create(cpc)) == NULL) {
(void) fprintf(stderr, "cpc_set_create() failed\en");
result = -2;
goto cleanup_close;
}
for (i = 0; i < NEVENTS; i++) {
ev = &events[i];
if (ev->flag & CPC_HW_SMPL) {
ev->nrecs = ev->attr[0].ca_val;
}
ev->idx = cpc_set_add_request(cpc, cpc_set,
ev->event, ev->preset, ev->flag, ev->nattr, ev->attr);
if (ev->idx < 0) {
(void) fprintf(stderr,
"cpc_set_add_request() failed\en");
result = -2;
goto cleanup_set;
}
if (ev->flag & CPC_HW_SMPL) {
if (setup_recitems(ev) != 0) {
(void) fprintf(stderr,
"setup_recitems() failed\en");
result = -2;
goto cleanup_set;
}
}
}
if ((cpc_buf = cpc_buf_create(cpc, cpc_set)) == NULL) {
(void) fprintf(stderr, "cpc_buf_create() failed\en");
result = -2;
goto cleanup_set;
}
if ((cpc_buf_sig = cpc_buf_create(cpc, cpc_set)) == NULL) {
(void) fprintf(stderr, "cpc_buf_create() failed\en");
result = -2;
goto cleanup_set;
}
sa.sa_sigaction = sig_handler;
sa.sa_flags = SA_RESTART | SA_SIGINFO;
(void) sigemptyset(&sa.sa_mask);
if (sigaction(SIGEMT, &sa, NULL) != 0) {
(void) fprintf(stderr, "sigaction() failed\en");
result = -2;
goto cleanup_set;
}
if (cpc_bind_curlwp(cpc, cpc_set, 0) != 0) {
(void) fprintf(stderr, "cpc_bind_curlwp() failed\en");
result = -2;
goto cleanup_set;
}
/*
* ==================
* Do something here.
* ==================
*/
if (err) {
(void) fprintf(stderr, "Error happened\en");
result = -2;
goto cleanup_bind;
}
(void) cpc_disable(cpc);
if (retrieve_results(cpc_buf) != 0) {
(void) fprintf(stderr, "retrieve_results() failed\en");
result = -2;
goto cleanup_bind;
}
cleanup_bind:
(void) cpc_unbind(cpc, cpc_set);
cleanup_set:
(void) cpc_set_destroy(cpc, cpc_set);
cleanup_close:
(void) cpc_close(cpc);
return (result);
}
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Interface StabilityCommitted _ MT-LevelSafe
SEE ALSO
cputrack(1), processor_bind(2), cpc_set_sample(3CPC), cpc_seter‐
rhndlr(3CPC), libcpc(3LIB), attributes(7), cpustat(8), psrinfo(8)
NOTES
When a set is bound, the system assigns a physical hardware counter to
count on behalf of each request in the set. If such an assignment is
not possible for all requests in the set, the bind function returns -1
and sets errno to EINVAL. The assignment of requests to counters de‐
pends on the capabilities of the available counters. Some processors
(such as Pentium 4) have a complicated counter control mechanism that
requires the reservation of limited hardware resources beyond the ac‐
tual counters. It could occur that two requests for different events
might be impossible to count at the same time due to these limited
hardware resources. See the processor manual as referenced by
cpc_cpuref(3CPC) for details about the underlying processor's capabili‐
ties and limitations.
Some processors can be configured to dispatch an interrupt when a phys‐
ical counter overflows. The most obvious use for this facility is to
ensure that the full 64-bit counter values are maintained without re‐
peated sampling. Certain hardware, such as the UltraSPARC processor,
does not record which counter overflowed. A more subtle use for this
facility is to preset the counter to a value slightly less than the
maximum value, then use the resulting interrupt to catch the counter
overflow associated with that event. The overflow can then be used as
an indication of the frequency of the occurrence of that event.
The interrupt generated by the processor might not be particularly pre‐
cise. That is, the particular instruction that caused the counter over‐
flow might be earlier in the instruction stream than is indicated by
the program counter value in the ucontext.
When a CPC request is added to a set with the CPC_OVF_NOTIFY_EMT flag
set, then as before, the control registers and counter are preset from
the 64-bit preset value given. When the flag is set, however, the ker‐
nel arranges to send the calling process a SIGEMT signal when the over‐
flow occurs. The si_code member of the corresponding siginfo structure
is set to EMT_CPCOVF and the si_addr member takes the program counter
value at the time the overflow interrupt was delivered. Counting is
disabled until the set is bound again.
When a SMPL request is added to a set with the CPC_OVF_NOTIFY_EMT flag
set, then as before, the control registers and counter for the sampling
are preset from the 64-bit preset value given. When the flag is set,
however, the kernel arranges to send the calling process a SIGEMT sig‐
nal when the hardware collected the requested number of SMPL records
for the SMPL request. The si_code member of the corresponding siginfo
structure is set to EMT_CPCOVF and the si_addr member takes the program
counter value at the time the overflow interrupt for the sampling hard‐
ware was delivered. Sampling is kept enabled.
If the CPC_CAP_OVERFLOW_PRECISE bit is set in the value returned by
cpc_caps(3CPC), the processor is able to determine precisely which
counter has overflowed after receiving the overflow interrupt. On such
processors, the SIGEMT signal is sent only if a counter overflows and
the request that the counter is counting has the CPC_OVF_NOTIFY_EMT
flag set. If the capability is not present on the processor, the system
sends a SIGEMT signal to the process if any of its requests have the
CPC_OVF_NOTIFY_EMT flag set and any counter in its set overflows.
Different processors have different counter ranges available, though
all processors supported by Solaris allow at least 31 bits to be speci‐
fied as a counter preset value. Portable preset values lie in the range
UINT64_MAX to UINT64_MAX-INT32_MAX.
The appropriate preset value will often need to be determined experi‐
mentally. Typically, this value will depend on the event being measured
as well as the desire to minimize the impact of the act of measurement
on the event being measured. Less frequent interrupts and samples lead
to less perturbation of the system.
If the processor cannot detect counter overflow, bind will fail and re‐
turn ENOTSUP. Only user events can be measured using this technique.
See Example 2.
Pentium 4
Most Pentium 4 events require the specification of an event mask for
counting. The event mask is specified with the emask attribute.
Pentium 4 processors with HyperThreading Technology have only one set
of hardware counters per physical processor. To use cpc_bind_curlwp()
or cpc_bind_pctx() to measure per-LWP events on a system with Pentium 4
HT processors, a system administrator must first take processors in the
system offline until each physical processor has only one hardware
thread online (See the -p option to psrinfo(8)). If a second hardware
thread is brought online, all per-LWP bound contexts will be invali‐
dated and any attempt to sample or bind a CPC set will return EAGAIN.
Only one CPC set at a time can be bound to a physical processor with
cpc_bind_cpu(). Any call to cpc_bind_cpu() that attempts to bind a set
to a processor that shares a physical processor with a processor that
already has a CPU-bound set returns an error.
To measure the shared state on a Pentium 4 processor with HyperThread‐
ing, the count_sibling_usr and count_sibling_sys attributes are pro‐
vided for use with cpc_bind_cpu(). These attributes behave exactly as
the CPC_COUNT_USER and CPC_COUNT_SYSTEM request flags, except that they
act on the sibling hardware thread sharing the physical processor with
the CPU measured by cpc_bind_cpu(). Some CPC sets will fail to bind due
to resource constraints. The most common type of resource constraint is
an ESCR conflict among one or more requests in the set. For example,
the branch_retired event cannot be measured on counters 12 and 13 si‐
multaneously because both counters require the CRU_ESCR2 ESCR to mea‐
sure this event. To measure branch_retired events simultaneously on
more than one counter, use counters such that one counter uses
CRU_ESCR2 and the other counter uses CRU_ESCR3. See the processor docu‐
mentation for details.
Oracle Solaris 11.4 1 Feb 2011 cpc...rlwp(3CPC)