svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
cfgadm(8)
cfgadm(8) System Administration Commands cfgadm(8)
NAME
cfgadm - configuration administration
SYNOPSIS
/usr/sbin/cfgadm [-f] [-y | -n] [-v] [-o hardware_options]
-c function ap_id...
/usr/sbin/cfgadm [-f] [-y | -n] [-v] [-o hardware_options]
-x hardware_function ap_id...
/usr/sbin/cfgadm [-v] [-a] [-s listing_options]
[-o hardware_options] [-l [ap_id | ap_type]]
/usr/sbin/cfgadm [-v] [-o hardware_options] -t ap_id...
/usr/sbin/cfgadm [-v] [-o hardware_options] -h
[ap_id | ap_type]
DESCRIPTION
The cfgadm command provides configuration administration operations on
dynamically reconfigurable hardware resources. These operations include
displaying status, (-l), initiating testing, (-t), invoking configura‐
tion state changes, (-c), invoking hardware specific functions, (-x),
and obtaining configuration administration help messages (-h). Configu‐
ration administration is performed at attachment points, which are
places where system software supports dynamic reconfiguration of hard‐
ware resources during continued operation of Solaris.
Configuration administration makes a distinction between hardware re‐
sources that are physically present in the machine and hardware re‐
sources that are configured and visible to Solaris. The nature of con‐
figuration administration functions are hardware specific, and are per‐
formed by calling hardware specific libraries.
Configuration administration operates on an attachment point. Hardware
resources located at attachment points can or can not be physically re‐
placeable during system operation, but are dynamically reconfigurable
by way of the configuration administration interfaces.
An attachment point defines two unique elements, which are distinct
from the hardware resources that exist beyond the attachment point. The
two elements of an attachment point are a receptacle and an occupant.
Physical insertion or removal of hardware resources occurs at attach‐
ment points and results in a receptacle gaining or losing an occupant.
Configuration administration supports the physical insertion and re‐
moval operations as well as other configuration administration func‐
tions at an attachment point.
Attachment points have associated state and condition information. The
configuration administration interfaces provide control for transition‐
ing attachment point states. A receptacle can exist in one of three
states: empty, disconnected or connected, while an occupant can exist
in one of two states: configured or unconfigured.
A receptacle can provide the empty state, which is the normal state of
a receptacle when the attachment point has no occupants. A receptacle
can also provide the disconnected state if it has the capability of
isolating its occupants from normal system access. Typically this state
is used for various hardware specific testing prior to bringing the oc‐
cupant's resources into full use by the system, or as a step in prepar‐
ing an occupant for physical removal or reconfiguration. A receptacle
in the disconnected state isolates its occupant from the system as much
as its hardware allows, but can provide access for testing and setup. A
receptacle must provide the connected state, which allows normal access
to hardware resources contained on any occupants. The connected state
is the normal state of a receptacle that contains an occupant and that
is not currently undergoing configuration administration operations.
The hardware resources contained on an occupant in the unconfigured
state are not represented by normal Solaris data structures and are
thus not available for use by Solaris. Operations allowed on an uncon‐
figured occupant are limited to configuration administration opera‐
tions. The hardware resources of an occupant in the configured state
are represented by normal Solaris data structures and thus some or all
of those hardware resources can be in use by Solaris. All occupants
provide both the configured and unconfigured states,
An attachment point can be in one of five conditions: unknown, ok,
failing, failed, or unusable. An attachment point can enter the system
in any condition depending upon results of power-on tests and non-
volatile record keeping.
An attachment point with an occupant in the configured state is in one
of four conditions: unknown, ok, failing, or failed. If the condition
is not failing or failed an attachment point can change to failing dur‐
ing the course of operation if a hardware dependent recoverable error
threshold is exceeded. If the condition is not failed an attachment
point can change to failed during operation as a result of an unrecov‐
erable error.
An attachment point with an occupant in the unconfigured state can be
in any of the defined conditions. The condition of an attachment point
with an unconfigured occupant can decay from ok to unknown after a ma‐
chine dependent time threshold. Initiating a test function changes the
attachment point's condition to ok, failing or failed depending on the
outcome of the test. An attachment point that does not provide a test
function can leave the attachment point in the unknown condition. If a
test is interrupted, the attachment point's condition can be set to the
previous condition, unknown or failed. An attachment point in the un‐
known, ok, failing, or failed conditions can be re-tested.
An attachment point can exist in the unusable condition for a variety
of reasons, such as inadequate power or cooling for the receptacle, an
occupant that is unidentifiable, unsupported, incorrectly configured,
etc. An attachment point in the unusable condition can never be used by
the system. It typically remains in this condition until the physical
cause is remedied.
An attachment point also maintains busy information that indicates when
a state change is in progress or the condition is being reevaluated.
Attachment points are referred to using hardware specific identifiers
(ap_ids) that are related to the type and location of the attachment
points in the system device hierarchy. An ap_id can not be ambiguous,
it must identify a single attachment point. Two types of ap_id specifi‐
cations are supported: physical and logical. A physical ap_id contains
a fully specified pathname, while a logical ap_id contains a shorthand
notation that identifies an attachment point in a more user-friendly
way.
For example, an attachment point representing a system's backplane slot
number 7 could have a physical ap_id of /devices/central/fhc/sysc‐
trl:slot7 while the logical ap_id could be system:slot7. Another exam‐
ple, the third receptacle on the second PCI I/O bus on a system could
have a logical ap_id of pci2:plug3.
Attachment points may also be created dynamically. A dynamic attachment
point is named relative to a base attachment point which is present in
the system. ap_ids for dynamic attachment points consist of a base com‐
ponent followed by two colons (::) and a dynamic component. The base
component is the base attachment point ap_id. The dynamic component is
hardware specific and generated by the corresponding hardware specific
library.
An ap_type is a partial form of a logical ap_id that can be ambiguous
and not specify a particular attachment point. An ap_type is a sub‐
string of the portion of the logical ap_id up to but not including the
colon (:) separator. For example, an ap_type of pci would show all at‐
tachment points whose logical ap_ids begin with pci.
The use of ap_types is discouraged. The new select sub-option to the -s
option provides a more general and flexible mechanism for selecting at‐
tachment points. See OPTIONS.
The cfgadm command interacts primarily with hardware dependent func‐
tions contained in hardware specific libraries and thus its behavior is
hardware dependent.
For each configuration administration operation a service interruption
can be required. Should the completion of the function requested re‐
quire a noticeable service interruption to interactive users, a prompt
is output on the standard error output for confirmation on the standard
input before the function is started. Confirmation can be overridden
using the -y or -n options to always answer yes or no respectively.
Hardware specific options, such as test level, are supplied as sub-op‐
tions using the -o option.
Operations that change the state of the system configuration are au‐
dited by the system log daemon syslogd(8).
The arguments for this command conform to the getopt(3C) and getsub‐
opt(3C) syntax convention.
OPTIONS
The following options are supported:
-a
Specifies that the -l option must also list dynamic attachment
points.
-cfunction
Performs the state change function on the attachment point speci‐
fied by ap_id.
Specify function as insert, remove, disconnect, connect, configure
or unconfigure. These functions cause state transitions at the at‐
tachment point by calling hardware specific library routines and
are defined in the following list.
insert Performs operations that allows the user to manually
insert an occupant or to activate a hardware sup‐
plied mechanism that performs the physical inser‐
tion. insert can have hardware specific side effects
that temporarily suspend activity in portions of the
system. In such cases the hardware specific library
generates appropriate warning messages and informs
the user of any special considerations or procedures
unique to that hardware. Various hardware specific
errors can cause this function to fail and set the
receptacle condition to unusable.
remove Performs operations that allow the user to manually
remove an occupant or to activate a hardware sup‐
plied mechanism to perform the physical removal. re‐
move can have hardware specific side effects that
temporarily suspend activity in portions of the sys‐
tem. In such cases the hardware specific library
generates appropriate warning messages and informs
the user of any special considerations or procedures
unique to that hardware. Various hardware specific
errors can cause this function to fail and set the
receptacle condition to unusable.
disconnect Performs hardware specific operations to put a re‐
ceptacle in the disconnected state, which can pre‐
vent an occupant from operating in a normal fashion
through the receptacle.
connect Performs hardware specific operations to put the re‐
ceptacle in the connected state, which allows an oc‐
cupant to operate in a normal fashion through the
receptacle.
configure Performs hardware specific operations that allow an
occupant's hardware resources to be usable by So‐
laris. Occupants that are configured are part of the
system configuration and are available for manipula‐
tion by Solaris device manipulation maintenance com‐
mands (eg: psradm(8), mount(8), ifconfig(8)).
unconfigure Performs hardware specific operations that logically
remove an occupant's hardware resources from the
system. The occupant must currently be configured
and its hardware resources must not be in use by So‐
laris.
State transition functions can fail due to the condition of the at‐
tachment point or other hardware dependent considerations. All
state change functions in the direction of adding resources, (in‐
sert, connect, and configure) are passed onto the hardware specific
library when the attachment point is in the ok or unknown condi‐
tion. All other conditions require the use of the force option to
allow these functions to be passed on to the hardware specific li‐
brary. Attachment point condition does not prevent a hardware spe‐
cific library being called for related to the removal (remove, dis‐
connect, and unconfigure) of hardware resources from the system.
Hardware specific libraries can reject state change functions if
the attachment point is in the unknown condition.
The condition of an attachment point is not necessarily changed by
the state change functions, however errors during state change op‐
erations can change the attachment point condition. An attempt to
override a condition and force a state change that would otherwise
fail can be made by specifying the force option (-f). Hardware spe‐
cific safety and integrity checks can prevent the force option from
having any effect.
-f
Forces the specified action to occur. Typically, this is a hardware
dependent override of a safety feature. Forcing a state change op‐
eration can allow use of the hardware resources of occupant that is
not in the ok or unknown conditions, at the discretion of any hard‐
ware dependent safety checks.
-h [ap_id | ap_type ... ]
Prints out the help message text. If ap_id or ap_type is specified,
the help routine of the hardware specific library for the attach‐
ment point indicated by the argument is called.
-l [ap_id | ap_type ... ]
Lists the state and condition of attachment points specified. At‐
tachment points can be filtered by using the -s option and select
sub-option. Invoking cfgadm without one of the action options is
equivalent to -l without an argument. The format of the list dis‐
play is controlled by the -v and -s options. When the -a option is
specified attachment points are dynamically expanded.
-n
Suppress any interactive confirmation and assume that the answer is
no. If neither -n or -y is specified, interactive confirmation is
obtained through the standard error output and the standard input.
If either of these standard channels does not correspond to a ter‐
minal (as determined by isatty(3C)) then the -n option is assumed.
-ohardware_options
Supplies hardware specific options to the main command option. The
format and content of the hardware option string is completely
hardware specific. The option string hardware_options conforms to
the getsubopt(3C) syntax convention.
-slisting_options
Supplies listing options to the list (-l) command. listing_options
conforms to the getsubopt(3C) syntax convention. The sub-options
are used to specify the attachment point selection criteria (se‐
lect=select_string), the type of matching desired
(match=match_type), order of listing (sort=field_spec), the data
that is displayed (cols=field_spec and cols2=field_spec), the col‐
umn delimiter (delim=string) and whether to suppress column head‐
ings (noheadings).
When the select sub-option is specified, only attachment points
which match the specified criteria will be listed. The select sub-
option has the following syntax:
cfgadm -s select=attr1(value1):attr2(value2)...
where an attr is one of ap_id, class or type. ap_id refers to the
logical ap_id field, class refers to attachment point class and
type refers to the type field. value1, value2, etc. are the corre‐
sponding values to be matched. The type of match can be specified
by the match sub-option as follows:
cfgadm -s match=match_type,select=attr1(value1)...
where match_type can be either exact or partial. The default value
is exact.
Arguments to the select sub-option can be quoted to protect them
from the shell.
A field_spec is one or more data-fields concatenated using colon
(:), as in data-field:data-field:data-field. A data-field is one of
ap_id, physid, r_state, o_state, condition, type, busy, sta‐
tus_time, status_time_p, class, and info. The ap_id field output is
the logical name for the attachment point, while the physid field
contains the physical name. The r_state field can be empty, discon‐
nected or connected. The o_state field can be configured or uncon‐
figured. The busy field can be either y if the attachment point is
busy, or n if it is not. The type and info fields are hardware spe‐
cific. The status_time field provides the time at which either the
r_state, o_state, or condition of the attachment point last
changed. The status_time_p field is a parsable version of the sta‐
tus_time field. If an attachment point has an associated class, the
class field lists the class name. If an attachment point does not
have an associated class, the class field lists none.
The order of the fields in field_spec is significant: For the sort
sub-option, the first field given is the primary sort key. For the
cols and cols2 sub-options, the fields are printed in the order re‐
quested. The order of sorting on a data-field can be reversed by
placing a minus (−) before the data-field name within the field_sec
for the sort sub-option. The default value for sort is ap_id. The
defaults values for cols and cols2 depend on whether the -v option
is given: Without it cols is ap_id:r_state:o_state:condition and
cols2 is not set. With -v cols is ap_id:r_state:o_state:condi‐
tion:info and cols2 is status_time:type:busy:physid:. The default
value for delim is a single space. The value of delim can be a
string of arbitrary length. The delimiter cannot include comma (,)
character, see getsubopt(3C). These listing options can be used to
create parsable output. See NOTES.
-t
Performs a test of one or more attachment points. The test function
is used to re-evaluate the condition of the attachment point. With‐
out a test level specifier in hardware_options, the fastest test
that identifies hard faults is used.
More comprehensive tests are hardware specific and are selected us‐
ing the hardware_options.
The results of the test is used to update the condition of the
specified occupant to either ok if no faults are found, failing if
recoverable faults are found or failed if any unrecoverable faults
are found.
If a test is interrupted, the attachment point's condition can be
restored to its previous value or set to unknown if no errors were
found or failing if only recoverable errors were found or to failed
if any unrecoverable errors were found. The attachment point should
only be set to ok upon normal completion of testing with no errors.
-v
Executes in verbose mode. For the -c, -t and -x options outputs a
message giving the results of each attempted operation. Outputs de‐
tailed help information for the -h option. Outputs verbose informa‐
tion for each attachment point for the -l option.
-xhardware_function
Performs hardware specific functions. Private hardware specific
functions can change the state of a receptacle or occupant. Attach‐
ment point conditions can change as the result of errors encoun‐
tered during private hardware specific functions. The format and
content of the hardware_function string is completely hardware spe‐
cific. The option string hardware_function conforms to the getsub‐
opt(3C) syntax convention.
-y
Suppresses any interactive confirmation and assume that the answer
is yes.
USAGE
The required privileges to use this command are hardware dependent.
Typically, a default system configuration restricts all but the list
option to the superuser.
EXAMPLES
Example 1 Listing Attachment Points in the Device Tree
The following example lists all attachment points except dynamic at‐
tachment points.
example# cfgadm
Ap_Id Type Receptacle Occupant Cond
system:slot0 cpu/mem connected configured ok
system:slot1 sbus-upa connected configured ok
system:slot2 cpu/mem connected configured ok
system:slot3 unknown connected unconfigured unknown
system:slot4 dual-sbus connected configured failing
system:slot5 cpu/mem connected configured ok
system:slot6 unknown disconnected unconfigured unusable
system:slot7 unknown empty unconfigured ok
c0 scsi-bus connected configured unknown
c1 scsi-bus connected configured unknown
Example 2 Listing All Configurable Hardware Information
The following example lists all current configurable hardware informa‐
tion, including those represented by dynamic attachment points:
example# cfgadm -al
Ap_Id Type Receptacle Occupant Cond
system:slot0 cpu/mem connected configured ok
system:slot1 sbus-upa connected configured ok
system:slot2 cpu/mem connected configured ok
system:slot3 unknown connected unconfigured unknown
system:slot4 dual-sbus connected configured failing
system:slot5 cpu/mem connected configured ok
system:slot6 unknown disconnected unconfigured unusable
system:slot7 unknown empty unconfigured ok
c0 scsi-bus connected configured unknown
c0::dsk/c0t14d0 disk connected configured unknown
c0::dsk/c0t11d0 disk connected configured unknown
c0::dsk/c0t8d0 disk connected configured unknown
c0::rmt/0 tape connected configured unknown
c1 scsi-bus connected configured unknown
Example 3 Listing Selectively, Based on Attachment Point Attributes
The following example lists all attachment points whose class begins
with scsi, ap_id begins with c and type field begins with scsi. The ar‐
gument to the -s option is quoted to protect it from the shell.
example# cfgadm -s "match=partial,select=class(scsi):ap_id(c):type(scsi)"
Ap_Id Type Receptacle Occupant Cond
c0 scsi-bus connected configured unknown
c1 scsi-bus connected configured unknown
Example 4 Listing Current Configurable Hardware Information in Verbose
Mode
The following example lists current configurable hardware information
for ap-type system in verbose mode:
example# cfgadm -v -l system
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
system:slot1 connected configured ok
Apr 4 23:50 sbus-upa n /devices/central/fhc/sysctrl:slot1
system:slot3 connected configured ok non-detachable
Apr 17 11:20 cpu/mem n /devices/central/fhc/sysctrl:slot3
system:slot5 connected configured ok
Apr 4 23:50 cpu/mem n /devices/central/fhc/sysctrl:slot5
system:slot7 connected configured ok
Apr 4 23:50 dual-sbus n /devices/central/fhc/sysctrl:slot7
The When column represents the status_time field.
Example 5 Testing Two Occupants Using the Hardware Specific Extended
Test
The following example tests two occupants using the hardware specific
extended test:
example# cfgadm -v -o extended -t system:slot3 system:slot5
Testing attachment point system:slot3 ... ok
Testing attachment point system:slot5 ... ok
Example 6 Configuring an Occupant Using the Force Option
The following example configures an occupant in the failing state to
the system using the force option:
example# cfgadm -f -c configure system:slot3
Example 7 Unconfiguring an Occupant From the System
The following example unconfigures an occupant from the system:
example# cfgadm -c unconfigure system:slot4
Example 8 Configuring an Occupant at an Attachment Point
The following example configures an occupant:
example# cfgadm -c configure c0::dsk/c0t0d0
ENVIRONMENT VARIABLES
See environ(7) for descriptions of the following environment variables
that affect the execution of cfgadm: LC_TIME, LC_MESSAGES, NLSPATH and
TZ.
LC_MESSAGES Determines how cfgadm displays column headings and error
messages. Listing output data is not affected by the
setting of this variable.
LC_TIME Determines how cfgadm displays human readable status
changed time (status_time).
TZ Specifies the time zone used when converting the status
changed time. This applies to both the human readable
(status_time) and parsable (status_time_p) formats.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
1 An error occurred.
2 Configuration administration not supported on specified target.
3 Usage error.
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Availabilitysystem/dynamic-reconfiguration
SEE ALSO
config_admin(3CFGADM), getopt(3C), getsubopt(3C), isatty(3C), attrib‐
utes(7), environ(7), cfgadm_fp(8), cfgadm_ib(8), cfgadm_pci(8), cf‐
gadm_sata(8), cfgadm_sbd(8), cfgadm_scsi(8), cfgadm_usb(8), ifcon‐
fig(8), mount(8), prtdiag(8), psradm(8), syslogd(8)
DIAGNOSTICS
Diagnostic messages appear on the standard error output. Other than op‐
tions and usage errors, the following are diagnostic messages produced
by this utility:
cfgadm: Configuration administration not supported on ap_id
cfgadm: No library found for ap_id
cfgadm: ap_id is ambiguous
cfgadm: operation: Insufficient privileges
cfgadm: Attachment point is busy, try again
cfgadm: No attachment points with specified attributes found
cfgadm: System is busy, try again
cfgadm: operation: Operation requires a service interruption
cfgadm: operation: Data error: error_text
cfgadm: operation: Hardware specific failure: error_text
See config_admin(3CFGADM) for additional details regarding error mes‐
sages.
NOTES
Hardware resources enter the unconfigured pool in a hardware specific
manner. This can occur at various times such as: system initialization
or as a result of an unconfigure operation. An occupant that is in the
unconfigured state is not available for use by the system until spe‐
cific intervention occurs. This intervention can be manifested as an
operator initiated command or it can be by way of an automatic config‐
uring mechanism.
The listing option of the cfgadm command can be used to provide
parsable input for another command, for example within a shell script.
For parsable output, the -s option must be used to select the fields
required. The -s option can also be used to suppress the column head‐
ings. The following fields always produce parsable output: ap_id,
physid, r_state, o_state, condition, busy status_time_p, class, and
type. Parsable output never has white-space characters embedded in the
field value.
The following shell script fragment finds the first good unconfigured
occupant of type CPU.
found=
cfgadm -l -s "noheadings,cols=ap_id:r_state:condition:type" | \
while read ap_id r_state cond type
do
if [ "$r_state" = unconfigured -a "$cond" = ok -a "$type" = CPU ]
then
if [ -z "$found" ]
then
found=$ap_id
fi
fi
done
if [ -n "$found" ]
then
echo "Found CPU $found"
fi
The format of the parsable time field (status_time_p) is YYYYMMDDhh‐
mmss, giving the year, month, day, hour, minute and second in a form
suitable for string comparison.
Reference should be made to the hardware specific documentation for de‐
tails of System Configuration Administration support.
Oracle Solaris 11.4 11 May 2021 cfgadm(8)