biosconfig(8) 맨 페이지 - 윈디하나의 솔라나라

개요

섹션
맨 페이지 이름
검색(S)

biosconfig(8)

biosconfig(8)           System Administration Commands           biosconfig(8)

NAME
       biosconfig - A BIOS configuration tool for Oracle x86 servers.

SYNOPSIS
       biosconfig [-v] <option> [filename]

DESCRIPTION
       A  command  line  utility to update the BIOS CMOS configuration on sup‐
       ported Oracle x86 servers. The biosconfig command can be  used  to  get
       current configuration settings or set configuration settings. When used
       to  get configuration settings, biosconfig generates XML output showing
       the configuration. When used to set configuration settings,  biosconfig
       reads XML input describing the configuration settings.

       The  XML  tag  definitions  are  determined by the current system BIOS.
       These values can vary by system type and it is not recommended that you
       use the same XML file to update the BIOS configuration across different
       system types.

       Caution -

         Setting the BIOS configuration incorrectly may  result  in  undesired
         operation  or  system instability. Refer to your server documentation
         and the Oracle Server CLI Tools Guide before using biosconfig.

       A complete list of currently supported Oracle servers is available at:

       http://www.oracle.com/goto/ohmp

OPTIONS
       [filename]

           Name of the XML output (or input) file for get (or  set)  commands.
           Get  commands will output to the console if a file name is not pro‐
           vided. Set commands will get input from the console if a file  name
           is not provided.

           See  the  Oracle  Server  CLI Tools Guide for the format of the XML
           file.

       -v

           Verbose mode enable. On some operations, this might  provide  addi‐
           tional  information  regarding  operational status. Verbose mode is
           only valid if an XML input or output filename is provided.

       <option>

           Only a single option can be used per command  execution.  The  con‐
           tents  of  the  input or output XML file will process only the data
           relevant to the option used. See the Oracle Server CLI Tools  Guide
           for more information.

           -get_version

               Get version of biosconfig.

           -get_boot_order

               Get the boot devices list.

           -set_boot_order

               Set the boot devices list.

           -set_boot_override

               Set first boot device for next boot.

           -get_bios_settings

               Get setup configuration from BIOS.

           -set_bios_settings

               Set setup configuration to BIOS ROM.

               Only  those attributes supported by the particular server model
               will be processed.

           -get_CMOS_dump

               Get 256 bytes of CMOS setup data from BIOS.

           -set_CMOS_dump

               Set 256 bytes of CMOS setup data to BIOS.


EXAMPLES
       Example 1 Getting BIOS configuration settings

         example# biosconfig -get_bios_settings bios_config.xml

       or

         example# biosconfig -get_bios_settings > bios_config.xml

       This command will retrieve the BIOS configuration and put it  into  the
       file  "bios_config.xml".  See the Oracle Server CLI Tools Guide for de‐
       scriptions of the contents of bios_config.xml.

       The first method in this example uses the command  line  parameters  to
       specify the output file. The second method directs stdout into the file
       bios_config.xml.

       Example 2 Setting the BIOS configuration

         example# biosconfig -set_bios_settings bios_config.xml

       or

         example# cat bios_config.xml | biosconfig -set_bios_settings

       This  command will use the configuration data in bios_config.xml to set
       the BIOS configuration in CMOS memory. See the Oracle Server CLI  Tools
       Guide for descriptions of the contents of bios_config.xml.

       The  first  method  in this example uses the command line parameters to
       specify the input file. The second method  pipes  bios_config.xml  from
       stdin into biosconfig.

ERRORS
       The following are biosconfig error codes:

         Error Code Error Description
         ---------- ------------------------------------------
         64         Execute biosconfig as root.
                    Do not run more than one instance of biosconfig
                    at the same time. There are no locks in place
                    to allow for multiple simultaneous accesses.


FILES
       /var/log/ssm/biosconfig.log

           biosconfig specific log file.

       /usr/bin/biosconfig

           The default location of biosconfig binary.


ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       tab()  box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
       TRIBUTE VALUE _ Architecturex86 _  Availabilitysystem/management/biois‐
       config _ Interface StabilityCommitted


SEE ALSO
       http://www.oracle.com/goto/ohmp/solarisdocs

       Copyright  (c) 2010, 2017, Oracle and/or its affiliates. All rights re‐
       served.

                               February 3, 2017                  biosconfig(8)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
RSS ATOM XHTML 5 CSS3