backend(7) 맨 페이지 - 윈디하나의 솔라나라
|
|
개요
- 솔라나라에 설명된 어플리케이션에 대해 맨 페이지를 찾아 출력한다.
- MAN 페이지에 대한 설명은 윈디하나의 솔라나라: MAN 페이지을 참고하자.
svcadm(8)을 검색하려면 섹션
에서 8 을 선택하고, 맨 페이지 이름
에 svcadm을 입력하고 검색을 누른다.
backend(7)
backend(7) OpenPrinting backend(7)
NAME
backend - cups backend transmission interfaces
SYNOPSIS
backend
backend job user title num-copies options [ filename ]
#include <cups/cups.h>
const char *cupsBackendDeviceURI(char **argv);
void cupsBackendReport(const char *device_scheme,
const char *device_uri,
const char *device_make_and_model,
const char *device_info,
const char *device_id,
const char *device_location);
ssize_t cupsBackChannelWrite(const char *buffer,
size_t bytes, double timeout);
int cupsSideChannelRead(cups_sc_command_t *command,
cups_sc_status_t *status, char *data,
int *datalen, double timeout);
int cupsSideChannelWrite(cups_sc_command_t command,
cups_sc_status_t status, const char *data,
int datalen, double timeout);
DESCRIPTION
Backends are a special type of filter(7) which is used to send print
data to and discover different devices on the system.
Like filters, backends must be capable of reading from a filename on
the command-line or from the standard input, copying the standard input
to a temporary file as required by the physical interface.
The command name (argv[0]) is set to the device URI of the destination
printer. Authentication information in argv[0] is removed, so backend
developers are urged to use the DEVICE_URI environment variable when‐
ever authentication information is required. The cupsBackendDeviceURI()
function may be used to retrieve the correct device URI.
Back-channel data from the device should be relayed to the job filters
using the cupsBackChannelWrite function.
Backends are responsible for reading side-channel requests using the
cupsSideChannelRead() function and responding with the cupsSideChannel‐
Write() function. The CUPS_SC_FD constant defines the file descriptor
that should be monitored for incoming requests.
DEVICE DISCOVERY
When run with no arguments, the backend should list the devices and
schemes it supports or is advertising to the standard output. The out‐
put consists of zero or more lines consisting of any of the following
forms:
device-class scheme "Unknown" "device-info"
device-class device-uri "device-make-and-model" "device-info"
device-class device-uri "device-make-and-model" "device-info" "device-id"
device-class device-uri "device-make-and-model" "device-info" "device-id" "device-location"
The cupsBackendReport() function can be used to generate these lines
and handle any necessary escaping of characters in the various strings.
The device-class field is one of the following values:
direct
The device-uri refers to a specific direct-access device with no
options, such as a parallel, USB, or SCSI device.
file The device-uri refers to a file on disk.
network
The device-uri refers to a networked device and conforms to the
general form for network URIs.
serial
The device-uri refers to a serial device with configurable baud
rate and other options. If the device-uri contains a baud value,
it represents the maximum baud rate supported by the device.
The scheme field provides the URI scheme that is supported by the back‐
end. Backends should use this form only when the backend supports any
URI using that scheme. The device-uri field specifies the full URI to
use when communicating with the device.
The device-make-and-model field specifies the make and model of the de‐
vice, e.g. "Example Foojet 2000". If the make and model is not known,
you must report "Unknown".
The device-info field specifies additional information about the de‐
vice. Typically this includes the make and model along with the port
number or network address, e.g. "Example Foojet 2000 USB #1".
The optional device-id field specifies the IEEE-1284 device ID string
for the device, which is used to select a matching driver.
The optional device-location field specifies the physical location of
the device, which is often used to pre-populate the printer-location
attribute when adding a printer.
PERMISSIONS
Backends without world read and execute permissions are run as the root
user. Otherwise, the backend is run using an unprivileged user ac‐
count, typically "lp".
EXIT STATUS
The following exit codes are defined for backends:
CUPS_BACKEND_OK
The print file was successfully transmitted to the device or re‐
mote server.
CUPS_BACKEND_FAILED
The print file was not successfully transmitted to the device or
remote server. The scheduler will respond to this by canceling
the job, retrying the job, or stopping the queue depending on the
state of the printer-error-policy attribute.
CUPS_BACKEND_AUTH_REQUIRED
The print file was not successfully transmitted because valid au‐
thentication information is required. The scheduler will respond
to this by holding the job and adding the 'cups-held-for-authenti‐
cation' keyword to the "job-reasons" Job Description attribute.
CUPS_BACKEND_HOLD
The print file was not successfully transmitted because it cannot
be printed at this time. The scheduler will respond to this by
holding the job.
CUPS_BACKEND_STOP
The print file was not successfully transmitted because it cannot
be printed at this time. The scheduler will respond to this by
stopping the queue.
CUPS_BACKEND_CANCEL
The print file was not successfully transmitted because one or
more attributes are not supported or the job was canceled at the
printer. The scheduler will respond to this by canceling the job.
CUPS_BACKEND_RETRY
The print file was not successfully transmitted because of a tem‐
porary issue. The scheduler will retry the job at a future time -
other jobs may print before this one.
CUPS_BACKEND_RETRY_CURRENT
The print file was not successfully transmitted because of a tem‐
porary issue. The scheduler will retry the job immediately with‐
out allowing intervening jobs.
All other exit code values are reserved.
ENVIRONMENT
In addition to the environment variables listed in cups(1) and fil‐
ter(7), CUPS backends can expect the following environment variable:
DEVICE_URI
The device URI associated with the printer.
FILES
/etc/cups/cups-files.conf
ATTRIBUTES
See attributes(7) for descriptions of the following attributes:
box; cbp-1 | cbp-1 l | l . ATTRIBUTE TYPE ATTRIBUTE VALUE = Availabil‐
ity print/cups = Stability Volatile
NOTES
CUPS backends are not generally designed to be run directly by the
user. Aside from the device URI issue ( argv[0] and DEVICE_URI envi‐
ronment variable contain the device URI), CUPS backends also expect
specific environment variables and file descriptors, and typically run
in a user session that (on macOS) has additional restrictions that af‐
fect how it runs. Backends can also be installed with restricted per‐
missions (0500 or 0700) that tell the scheduler to run them as the
"root" user instead of an unprivileged user (typically "lp") on the
system.
Unless you are a developer and know what you are doing, please do not
run backends directly. Instead, use the lp(1) or lpr(1) programs to
send print jobs or lpinfo(8) to query for available printers using the
backend. The one exception is the SNMP backend - see cups-snmp(8) for
more information.
Source code for open source software components in Oracle Solaris can
be found at https://www.oracle.com/downloads/opensource/solaris-source-
code-downloads.html.
This software was built from source available at:
https://github.com/oracle/solaris-userland
The original community source was downloaded from:
https://github.com/OpenPrinting/cups/releases/down‐
load/v2.4.15/cups-2.4.15-source.tar.gz
Further information about this software can be found on the open source
community website at http://www.cups.org/.
NOTES
CUPS printer drivers and backends are deprecated and will no longer be
supported in a future feature release of CUPS. Printers that do not
support IPP can be supported using applications such as
ippeveprinter(1).
SEE ALSO
cups(1), cups-files.conf(5), cups-snmp(8), cupsd(8), filter(7), lp(1),
lpinfo(8), lpr(1),
CUPS Online Help (http://localhost:631/help)
COPYRIGHT
Copyright © 2020-2024 by OpenPrinting.
2021-02-28 CUPS backend(7)
맨 페이지 내용의 저작권은 맨 페이지 작성자에게 있습니다.
