svcadm(8)을 검색하려면 섹션에서 8 을 선택하고, 맨 페이지 이름에 svcadm을 입력하고 검색을 누른다.
HBA_SendRNIDV2(3hbaapi)
HB...o(3HBAAPCIo)mmon Fibre Channel HBA Information Library FunctioHnBs...o(3HBAAPI)
NAME
HBA_SetRNIDMgmtInfo, HBA_GetRNIDMgmtInfo, HBA_SendRNID, HBA_SendRNIDV2
- access Fibre Channel Request Node Identification Data (RNID)
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
HBA_STATUS HBA_SetRNIDMgmtInfo(HBA_HANDLE handle,
HBA_MGMTINFO *pInfo);
HBA_STATUS HBA_GetRNIDMgmtInfo(HBA_HANDLE handle,
HBA_MGMTINFO *pInfo);
HBA_STATUS HBA_SendRNID(HBA_HANDLE handle, HBA_WWN wwn,
HBA_WWNTYPE wwntype, void *pRspBuffer,
HBA_UINT32 *RspBufferSize);
HBA_STATUS HBA_SendRNIDV2(HBA_HANDLE handle, HBA_WWN hbaPortWWN,
HBA_WWN destWWN, HBA_UINT32 destFCID,
HBA_UINT32 NodeIdDataFormat, void *pRspBuffer,
HBA_UINT32 *RspBufferSize);
PARAMETERS
handle
An open handle returned from HBA_OpenAdapter(3HBAAPI).
pInfo
HBA_SetRNIDMgmtInfo()
A pointer to a HBA_MGMTINFO structure containing the new RNID.
HBA_GetRNIDMgmtInfo()
A pointer to a HBA_MGMTINFO structure into which the RNID is
copied.
wwn
The discovered port WWN to which the request is sent.
wwntype
Deprecated.
hbaPortWWN
The Port WWN of the local HBA through which to send the ELS.
destWWN
The Port WWN of the remote Target to which the ELS is sent.
destFCID
If destFCID is non-zero, destFCID is the address identifier of the
remote target to which the ELS is sent. If destFCID is 0, destFCID
is ignored.
NodeIdDataFormat
the Node Identification Data Format value as defined in FC-FS
pRspBuffer
A pointer to a buffer into which the RNID response is copied. The
data will be in Big Endian format.
RspBufferSize
A pointer to the size of the buffer. On completion it will contain
the size of the actual response payload copied into the buffer.
DESCRIPTION
These functions access Fibre Channel Request Node Identification Data
(RNID) as defined in the T11 specification FC-FS.
The HBA_SetRNIDMgmtInfo() function sets the RNID returned from by HBA.
The HBA_GetRNIDMgmtInfo() function retrieves the stored RNID from the
HBA.
The HBA_SendRNID() function sends an RNID request to a discovered port.
The Node Identification Data format is always set to 0xDF for General
Topology Discovery Format as defined in the T11 specification FC-FS.
The HBA_SendRNIDV2() function sends an RNID request to a discovered
port requesting a specified Node Identification Data format.
RETURN VALUES
Upon successful completion, HBA_SetRNIDMgmtInfo() returns HBA_STATUS_OK
and sets the RNID.
Upon successful completion, HBA_GetRNIDMgmtInfo() returns HBA_STA‐
TUS_OK. Otherwise, an error value is returned and the content of pInfo
is undefined.
Upon successful completion, HBA_SendRNID() returns HBA_STATUS_OK. Oth‐
erwise, an error value is returned and the content of pRspBuffer is un‐
defined.
The HBA_SendRNIDV2() returns the following values:
HBA_STATUS_OK
The RNID ELS has been successfully returned.
HBA_STATUS_ERROR_ELS_REJECT
The RNID ELS was rejected by the HBA Port.
HBA_STATUS_ERROR_ILLEGAL_WWN
The value of hbaPortWWN is not a valid port WWN on the specified
HBA.
HBA_STATUS_ERROR_ILLEGAL_FCID
The destWWN/destFCID pair conflicts with a discovered Port Name/ad‐
dress identifier pair known by the HBA.
HBA_STATUS_ERROR_ILLEGAL_FCID
The N_Port WWN in the RNID response does not match destWWN.
HBA_STATUS_ERROR
An error occurred.
ERRORS
See attributes(7) for general error status values.
ATTRIBUTES
See libhbaapi(3LIB) for descriptions of the following attributes:
tab() box; cw(2.75i) |cw(2.75i) lw(2.75i) |lw(2.75i) ATTRIBUTE TYPEAT‐
TRIBUTE VALUE _ Interface StabilityCommitted _ StandardFC-HBA Version 4
(API version 2) _ MT-LevelSafe _ StandardFC-MI 1.92 (API version 1)
SEE ALSO
HBA_OpenAdapter(3HBAAPI), libhbaapi(3LIB), attributes(7)
T11 FC-MI Specification
BUGS
The HBA_SetRNIDMgmtInfo() and HBA_GetRNIDMgmtInfo() functions do not
take a portindex to define to which port of a multi-ported HBA the com‐
mand should apply. The behavior on multi-ported HBAs is vendor-specific
and can result in all ports being set to the same value.
The HBA_SetRNIDMgmtInfo() and HBA_GetRNIDMgmtInfo() functions allow
only 0xDF (General Topology Discovery Format).
The HBA_SendRNID() function does not take a portindex to define through
which port of a multi-ported HBA to send the command. The behavior on
multi-ported HBAs is vendor-specific and can result in the command be‐
ing sent through the first port.
The HBA_SendRNID() function does not take an argument to specify the
Node Identification Data Format. It always assumes that 0xDF (General
Topology Discovery Format) is desired. SNIA version 2 defines
HBA_SendRNIDV2() to take a Port WWN and a Node Data Format. This fixes
the bugs with multi-ported HBAs of allowing only0xDF (General Topology
Discovery Format) in HBA_SendRNID().
Oracle Solaris 11.4 19 Apr 2019 HB...o(3HBAAPI)